Separate names with a comma.
I take that back, just looked at the hooker web site. Small block fender well headers for barracuda and early dart and they look very close to...
Those look like they hang really low and look close to 2 inch primary tubes.
I have not seen those before but I can tell you that those are really old headers. No one I know still makes fender well headers for small block...
My guesstimate is your stock hp 273 has peak power in the 4800-5000 range. While all these charts and formulas are fun and interesting, none of...
3x on the sharp razor blade.
Then its 4 aught steel wool and dawn dish soap, water solution. Its the finest steel wool made, will not scratch the...
You have a vin number for that power train? I’m looking for my original power train for my 69 dart that is missing.
1.I don’t know anyone that makes/sells new SB fender well headers. The 2 pair I have are rusty/beat up.
2. The inner fender(apron) is in deed...
Properly sleeved are key words here. I would be careful about choosing a machinist to do this. I know diesel shops do this all the time. I would...
For the street or the track?
I always used a book of matches, but that was on my beater pickup.
One does wonder how deep the hardening actually is, testing is destructive.
Go far enough and you grind out the hardened bearing surface.
Still looking for backing board. Need to find someone who works in an upholstery shop the has access to trade publications(magazines)so we know...
Your topic is all of our topics brother. Hope you find your needs.
You need to check valve clearance anytime you change pistons and/or heads from stock.
Aggressive cams require heavy duty springs to keep the lifter from bouncing on the cam. The more open pressure than a stock spring, you risk...
I’d never buy another thing from koller if my life depended on it.
Bolts right in, no spacer if I remember correctly.
Photos of old and new shifters please.
Who restored the car and please post a photo of the fender tag and build sheet.
68 is a one year only dash so I’m going to say no.
Did you come up with this combo or is it the machine shop combo? With that torque and low hp, your not flowing enough air for high rpms for the hp...
213 fan? 68 340, didn’t have a clutch drive, direct drive.
Found and hung.
727 out of a 89 dodge pickup truck, electric overdrive.no floor cutting.
Thats a good price on a dial bore gauge, but you need standards to certify it.
Deadly if you know how to use them. +/-.0005.