Search results for query: *

A long ovderdue update: I pulled the old engine and put in Icon forged pistons, they were only 2-3 gr heavier in weight so no rebalance had to occur. Staying at 10.35-10.4:1 compression. I put in a Comp Cams 274 roller, and total seal gapless rings that are gapped for nitrous/turbo if needed...

I am selling a set of 1968 barracuda trunk molding. The trim has a little dents here and there they can be repaired. I tried to take the best pictures I could. If you PM me I can send you videos of them as well. Also comes with a set of new clips/bolt set from classic industries. I am willing to...

Borla ProXS is a great sounding deep muffler.

M My mistake, but he is still going to need to throw in a lump of cash to make that trade happen.

I will look when I get home to see what I have. Had some friends go through them an not a lot left.

8 1/4 were behind small blocks and slant 6's. Not trying to spoil your day, but you better add quite a bit of cash on your end as well.

17x8 rears 235/55/17 and 17x7 front 215/50/17, both 0 mm offset wheels. 59 1/2" width rear wheel mounting surface to surface:

I cut mine and welded in a 2" ish wide flat plate in place and it fit up in there perfect:

I have really no idea. I can strap it to a smaller pallet, weigh it and try to get a quote

Sale pending

I have not dyno'd it, but built a very similar to the one ran on Engine masters 408 vs 408 which made over 490 ft lbs and 438 hp. I put a little bigger cam than the did, and running 1.6 ratio rockers. Cam in the engine now is: https://www.summitracing.com/parts/cca-20-811-9 I never go to the...

I am only a 4 1/2 hour drive to Carlisle, PA. Not sure how far you are from there.

No, It is a complete and driving combination.

Have had a lot of interest but no bites yet. Here are a couple more pictures with the old valve covers on:

Looking to possibly sell my entire engine, transmission, Ignition, and fuel injection combination (Less than 1000 miles on entire set up) to start a different engine project. This is a pretty fun and fast engine combination for the street. Engine: It is a 2001 5.9 Magnum stroked out with a 4"...

Only fits a fastback 67-69. This one is a 68.

A few more pics I took today:

I would like to get this out of the way in my garage so don't be afraid to make an offer. Worst I can say is no or we can negotiate a deal

I have a 1968 Barracuda trunk lid off from a fastback that is in decent shape. There is some surface rust and a spot with a few holes (see pic), but overall is in great shape. Not rotted out like most of them you find. I have no truck trim available for this, asking $400 or best offer. I am...

That size looks great

Loganscuda, those look great. What size tires are you running?

I would love to see some 17's or 18's on a 67-69 Barracuda

72bluNblu, I am aware of that. I had my heater core removed and the line looped right back to the water pump inlet causing my issue.

I went through a similar issue. I did not read through all the comments but there were a few concerns that come to mind, and one of them is not air flow. I sealed everything, running a 3000 cfm fan, i can touch the radiator fins and they are not burning at all when my engine was at 205-210...

Stock A body is 57 1/8" wide WMS to WMS, so you are 1/2" narrower with the 8.8 cut to 56 5/8". An accurate 8 3/4" rear axle width list

Another video with a quick street launch: https://youtube.com/shorts/mk08UuM6rLg?feature=share

A quick video after it was all broke in https://youtube.com/shorts/79QwRkRuiGA?feature=share

Car is running well with the new 408 stroker

That car looks perfect just as it sits. I love it!!

I called Edelbrock. They will not give out any specs, only a part number, and then would not sell it to me, or tell me who sold it. Told me to try Summit, Jegs or some place like that. Summit has no listing for it. Jegs had it and said ship out on Sept 17th, comes directly from Edelbrock...