Separate names with a comma.
Photos photos photos.
I thought the chrome was on the surface.I'll pass then.Thanks
The one on my dart is most likely a repo from the 80s it had chrome on the outside. The nos I have has chrome on the inside and the profile is the...
What is wrong with your current setup?Should not need to if the cooling system is functioning correctly105 outside air temp and a 180 deg...
The one in the photo was just for show
Ace hardware, Amazon, Google, eBay.[ATTACH]
That is awesome.I wish Hamtramick was still there in it's old glory or at least Chrysler!
What do you hope to gain?
Look down carb and have someone pump the gas pedalNo shot from the accelerator pump dry bowl, shots not dry bowl.We have all gotten so spoiled...
It just so happens i am 3D printing these for another member.I can print both the short about 1/2 inch or the long about 3/4 inch.Pm me and we...
My observation...21V is most likely a misread ov the , voltage meter. 2.1 or 0. 21 is most likely The old style VR and alternator are wired...
Yep.Any idea of a part number? I looked at the 69 parts book but couldn't find the part.
Need more photos...My guess is the dist shaft was 90% sized when you rotated it by hand. Spinning the engine at speed and it siezed the rest of...
RTE Gauge Faq - rtehow to of sorts. I have their external IVR and whish I had gotten it sooner,
Yes. The 4 bolts on the body are the same location, suspension / steering mounts are the same. Some people have converted a /6 to V8 by welding...
No, not the same.6cly A body K frames have different motor mounting locations than the SB (V8) K Frames, BB (V8) K frames are different as well...
Latest REV CShort (~15/32) [ATTACH]Tall (~13/16) [ATTACH]
OEM.... [ATTACH]REV B.... [ATTACH]Next print will be with a more flexible material.This material is too brittle. The OEM is just propping...
I made a bump key and successfully turned my 68 and older lock.
What you are calling a door switch looks to be a brake switch. Photo 1 under the red box.
Learn something new every day!Are there any exterior tattle tails, like the od of the cyl?Never mind... The lock housing is totally different
While I was doing some trunk hinge repair.I had the welder weld some nice fitting tubing inside the hinge tube to act as a bearing surface...
I was asking what the root cause is for wanting to "take the slop out"Which we found out was a hood alignment problem. Could be the hinge or it...
[MEDIA]
I was driving home from SD for the June Cruse.We usually park by the gas station in the king supers parking lot.Look for a red and a blue 67...
Key has to be in run position to depress the pin.I'm assuming the op is asking about 67 (probably earlier) through last year the key is on the...
Photos show 68 and earlier, but principal still applies.With a flat L shaped piece of spring steel, sized to fit into the key way.Apply...
Yes it looks like that.
Many of the photos look like computer generated renders?
Ignorance is bliss.
