Separate names with a comma.
Cap it or run it to a pcv. Connecting it to an open breather will cause a vacuum leak.
Bore size,overall condition?
Check to make sure no fuel is getting into the oil.
Summit racing and Jegs should have some. Local parts store should be able to get one.
Can not disagree with that.
Make a rectangle shaped patch just big enough to cover the holes and conform with the contour of the firewall ,then cut out the firewall to match...
The panel bond may or may not contaminate the weld,use a piece of brass behind the hole and give it a shot. It would be better to weld holes than...
Like these?[ATTACH]
Is it complete and working? What size? 34,43,ho Interested.
Yes,use a length checker. Are you using adjustable rockers? Hydraulic or solid? What cam lift? Do you know what your spring pressures are? Can you...
I went with wilwood and I am happy with them.
The funeral service was very good,lots of family , friends and great cars.
Not on mine.
Lost a good friend on Tuesday. A Mopar man through and through. He will be missed. Helped with parts for me and many others. Ride on John,hope...
I like them all,especially the rare ones. Not a fan of rustrods.
Also do a cylinder pressure test. That will tell you where a problem can be.
Closed chamber heads,thin head gaskets and the right cam will do alot.
Something is definitely a miss. Cam installed advanced, straight up or retarded. I know cam is hydraulic, but is the preload good? Compression is...
Do not rule out a possible vacuum leak somewhere.
You can take them off and soak them in your favorite penetrant,then work the cable back and forth,or replace them.
Just enough to have about 1/8 of an inch of flat at the radius of the timing marks parallel to the balancer.
I had that issue with my 408 build, did not have an oil slinger. There was enough meat on the cover to make clearance for the Trck Flow balancer.
In my Barracuda[ATTACH]
In my truck[ATTACH]
That is a pretty good video.
Good needle nose pliers work well.
It should be about parallel with the axle to a little downward angle to it. Some bars have multiple bends to adjust for clearance,but the result...
Thank you,I will pass the chance on to someone else.
I am interested in the dash pad and end caps.
I will take the better one.
