Search results

  1. MuuMuu101

    [FOR SALE] March Performance 10271 3-Groove Crank Pulley

    I have a pretty much brand new March Performance 10271 crank pulley for sale. I literally opened the box, held it next to my existing crank pulley, and realized it didn't fit. It's never been bolted to a car. I am outside of my return window. Part is located near the Twin Cities in Minnesota. I...
  2. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    Just for fun, I decided to open the box that had my new crank pulley in it and it's for the wrong application completely. It wouldn't work. So, I just ordered a smaller alternator pulley for my Powermaster Alternator and hopefully that will be enough to charge the Dart. My current pulley OD is...
  3. MuuMuu101

    2022 FABO Meet-N-Greet MoPars in the Park Show Stillwater Minnesota

    Do they allow you to pay at the gate to get in? I tried signing up for the show online and it wasn't quite working. I would love to meet everyone.
  4. MuuMuu101

    Mopars in the Park 2022

    Do they allow you to pay at the gate to get in? I tried signing up for the show online and it wasn't quite working.
  5. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    Yeah, the house I bought has been a fixer upper so it's been taking all my energy and funds. There are a lot of "comfort repairs" I need to make so that I can enjoy it more. I have a "charging issue" right now that makes it difficult to drive the car. I have a new high output alternator...
  6. MuuMuu101

    Mopars in the Park 2022

    What day is that?
  7. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    Wow, it's been a year since I updated this. Well, not much of an update on the Dart itself. I had a kid and moved across country so, that's why I haven't done much with the car. It's pretty much the same. I drive it once a month on the freeway. The car needs some TLC & "updating." I'm not sure...
  8. MuuMuu101

    Mopars in the Park 2022

    I just moved to the area and I would like to bring my Dart. When/where is the FABO meet-up typically held?
  9. MuuMuu101

    Electric Conversion input

    The point I was making was using OEM Tesla computers, wiring harnesses, and stuff to do an EV conversion is significantly harder than going with an Aftermarket setup (like Stealth EV or EV West) to use a Tesla motor in an EV swap.
  10. MuuMuu101

    18's with 275s on a Duster

    I would like to make a note. Not all 275mm tires are the same width. A lot of the 200TW tires that have come out in the past year or so are actually wider (by approx. 10mm) than their predecessor's at the same size. While they are wider, most tires aren't taller for the same size. Notice the...
  11. MuuMuu101

    Electric Conversion input

    From what I understand, it will be an absolute nightmare. Mechanically, Tesla's are simple, but their computers are complex. I feel like there are a lot easier ways of doing an EV swap. I'd probably start with a 9" diameter or greater forklift motor and connect it to a manual transmission. If...
  12. MuuMuu101

    66 Plymouth Valiant/ Barracuda fiberglass parts!?

    Are you bonding studs to the back side or do you have to drill bolts through it?
  13. MuuMuu101

    66 Plymouth Valiant/ Barracuda fiberglass parts!?

    I haven't seen many pictures of Mopar fiberglass parts. What kind of mounting hardware is provided for the bumpers?
  14. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    My tires end up rubbing on the wheel wells before I bottom out the differential. But it usually only happens when I have someone in the car. I have an extra set of stiffer, AFCO leaf springs I have been meaning to install. The Hotchkis ones are just a little too soft. My car is also a little bit...
  15. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    I don't have too much to update on. I've been having issues with my 3D printer that I've been troubleshooting for a week, so I haven't been able to print out a couple more block-off plates. I worked with the digital dash assembly I had and was able to fix the odometer so now I'm reading and...
  16. MuuMuu101

    18x9.5 +12

    My only problem with a 265/35/18 is that it's about 3/4" shorter in diameter and my car is already low. If you look at the new tires coming out, they all seem to be coming out wider for the same size. For instance, compare the section width of a 275/35/18 for both a Falken 615K+ (10.8") and an...
  17. MuuMuu101

    18x9.5 +12

    It's pretty obvious that in the rear I wouldn't be able to fit more than a 275. The front on a +12 wheel surprised me. I didn't figure that a fender roller would stretch the fender out that much. Although, my car is pretty low as is. I'm thinking about upgrading at least tires in the near...
  18. MuuMuu101

    18x9.5 +12

    I'm still perplexed how you fit that much tire under there. I have to find someone who has a fender roller or buy one for myself. I'm scratching my head how I'm going to get 265/35/R18's under my Dart.
  19. MuuMuu101

    1967 dodge dart instrument panel

    I couldn't find any so I bought a universal gauge panel from Intellitronix, 3D printed a mounting cluster in 4 pieces and had a shop glue and install it in my Dart. The 3D printed parts aren't the prettiest but it looks cool and works...
  20. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    I tried taking an old suction cup cellphone holder and tried incorporating it into a block-off plate. After 3 failed 3D printing attempts I gave up and just decided to make it a standard block-off plate. I'm happy with how it turned out. Now to design a couple more block off plates.
  21. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    We got a doggy DNA kit for Christmas. The company is called Embark.
  22. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    Thank you! I'm trying to get the Dart to be as reliable as possible. At least it's running and driving. Whenever I have time and energy, I'd like to take one of my original Dart seats and place it in the back for a baby seat. Shhhhhhhhh... Don't tell. Here's a $5. Thank you! He's a crazy...
  23. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    Not too much of an update. Back to doing a lot of OT at work. Drove the Dart approx. 30 miles today to get gas, drive through the local canyons, and pick up groceries. I've been 3D printing some block-out plate/cell phone holder for the dash. I'm on my 3rd iteration of the print trying to get...
  24. MuuMuu101

    3D Printing Rocker Trim Clips

    I'm also an engineer with a 3D Printer. If anyone needs help, let me know. I'd be glad to try to solve some problems.
  25. MuuMuu101

    Any A-Body YouTubers Out There?

    I can totally relate. I started a YouTube channel back in 2015 to 2016. I had posted a couple videos on here and it got pretty good reception. I'd either cruise around in my Dart and talk about automotive topics as a young enthusiast or show clips of me autocrossing. Those videos are now off...
  26. MuuMuu101

    Another "Will these fit?": 18" Mustang wheels

    Correct, the kit comes with offset front hangers as well. I want to say these came from Dr. Diff, but I don't remember. The wheels were made by Mickey Thompson and the P/N was SC-5. They are currently discontinued. I was actually thinking about selling these wheels and tires to get something...
  27. MuuMuu101

    Another "Will these fit?": 18" Mustang wheels

    Be a little cautious with this. If the Valiant rear wheel wells are similar to the Dart, then you'll find out that the outside fender lip isn't where the wheel well ends. The wheel well ends quite a bit inside of the fender lip. It's hard to see, but you may see me attempting to point to it in...
  28. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    So, I know I've been pretty quiet on FABO for the past year. 2020 has been quite a bit crazy. Luckily, both my wife and I have been employed and haven't experienced any financial hardship due to COVID. If anything, our work has been more busy. Since July, I have been putting in quite a bit of OT...
  29. MuuMuu101

    MuuMuu101's 68 Dart, A Learning Process...

    I did and mocking it up, it may have fit. However, all of my other dash trim was cracked and chipped to pieces that it wouldn't make sense. So, I 3D printed one.
  30. MuuMuu101

    My "new" '74 Duster- or why I need a project like a hole in the head

    Awesome work! I'm so jealous as to how much tire real-estate you get on the Duster. I just got my Dart back in my garage and have to look into options now that my car is running well.
Top