Separate names with a comma.
I'm going to take the car back to the shop in a couple of weeks and have them pull the gears out and take a look at everything. I'm not going to...
I believe they used a crushed sleeve
Thanks. I'll ask them.
I've already taken the shop owner for a ride and he's aware of the problem. He's the one who told me to drive it some more and see if the noise...
I got my car back from the shop that replaced the rear end with all new components including axles. There is a "whine" that happens on light...
I've got about 200 miles on my TKX swap. The upper torsion bar cross member was cut without any additional bracing except for the bolt in cross...
SOLD
I still haven't heard back from him. I'll give him until tonight and if he doesn't reply that he wants them, they're yours.
I certainly appreciate the education in rotational forces as it applies to our cars. While I won't be dropping the transmission and installing a...
They fit any A body mopar 67-75 model years. Here's the link to where I bought themFront & Rear Torque Box Set (4pcs) - 67-75 Dodge Plymouth...
You make some valid points. But would not the transmission itself (which is bolted to the new crossmember) act as a trianglualtion point?
UPS quotes $21. I don't know if the PO is cheaper or not
I hear you and understand your concern. I guess my feeling is that the cross brace was never triangulated to begin with....it's a metal "bar"...
I don't want to hijack this thread but I thought that I would offer up my thoughts about losing the top of the cross member. I've put about 200...
I'll figure that out tomorrow and let you know
SOLDBought these from Auto metal and never installed them. I paid $330 will sell for $290 plus shipping. Located in Raleigh NC[ATTACH]
I bought these but realized that they won't fit with my current headers. New, never installed. I paid $259 will sell for $220 plus shipping....
Used pump that came off my car before I switched to electric fuel pump. Located in Raleigh NC but will ship on your dime. $40. What you see is...
My pleasure. Note that I added another $500 to the total since I forgot to add in the sheet metal work.
A little over $6k for the kit, including clutch, pedal, etc. Another $3k for the installation.
I've put about 200 miles on the car since the transformation and I can't tell any difference in handling except that the car is stiffer, due to...
I'm not sure about the angle as the shop did all the work. You do need to replace the driveshaft as the length is different from when it was an...
Makes the drivability smoother. Instead of all four throttle blades opening at the same time, the front two open and the secondaires open at...
I suppose so. I have a Mac Pro laptop but I hate using PC software on it. I guess however that my real question was "does this sound like a low...
I noticed the hesitation while driving after the transmission swap...hence my concern.
The re-tune was done after the change. I did read the link you sent and I undestand it a bit. I don't use a PC laptop so I'll take the car back...
I'm trying to see if this is just my imagination or do I have a part throttle stumble? My car was recently retuned because I added the...
Wheels and tires specs" Special limited edition American Racing classic Torque Thrust “D”18 Inch Wheels. 6” front 8” rear 5 on 4 3/4 bolt...
I was wrong about the upper control arms....I thought they were adjustable but they are the standard tubular QA1 uppers. I hadn't looked at them...
Best photo I have at the moment[ATTACH]
