Separate names with a comma.
Bingo!!! For 33 bucks... 1966-74 A B E-Body Universal Seat Relocation Brackets
Are we to assume this is a low compression 273 (not a Commando)? I believe Toolmanmike is running a high compression 273 with a Holley 600.
Hi Chryslerfat, I have a pair of ‘66 Barracuda trunk lid hinges. One is ridiculously sloppy, the other not so bad. How much for you to bush and...
Picked up today. Thanks FABO!
A few interested parties have replied, one ahead of you, Beams. I’ll mark “SOLD” when gone. Thanks for your interest.
PM sent
A fellow FABO member gave me these headers for my ‘66 Barracuda. Story is one side has a modification to fit these in a sprint car. I’ve decided...
Hey Dibs, sorry to take a left turn here, but after I had frame connectors welded to my '66, we drilled/reamed a hole for the front cable to go...
Back in the 80's, I worked the parts counter at a Machine Shop in Cupertino. Machinist checked the block and said there's a lot of meat on it,...
No paintless dent repair will ever repair that. I’m in the industry, I’ve seen smaller dents like that not come out. Sorry if I burst some...
I, too, bought the U.S. Tools. I prefit them in my garage, then took them to a muffler shop to have them stitch welded. One weld every three...
Body flex. This Cuda has cracks in the same place on BOTH quarters under the back glass. My first Cuda had the same crack on one side. Too much...
[MEDIA]Just repeated the benchtest a few minutes ago. Works like a champ out of the car. Photo and 20 sec film. My son filmed...[ATTACH]
The upper harness shows no continuity with ground, reads “I”. My bench test was with 12v to the IVR, with the Chinese sender, was working like it...
And I am showing good continuity in the upper harness, test probes in the bottom plug and the round plug. Tells me the problem has to be in the...
Ok, fuel gauge out again with cardboard over the grounding strip.[ATTACH]
[ATTACH] This photo is from RT-E’s website also showing it mounted to a negative tracer to the bulb.
The new limiter is attached to a copper trace which is a ground for the bulb. The limiter clears any metal around it as it sits inside the...
I installed the RT-E regulator and bench tested with a cheap Chinese sender (see my post #13 with a picture). As I moved the sender float, the...
“Disconnect the sender wire at the sender and the instrument cluster. Set you meter to ohms and check the wire to ground. If it reads continuity,...
Sorry Ben. I deleted a bunch of forgotten posts. Great picture, thanks. $60 is fair. I can mail a check, ask my wife to PayPal you, I think...
You made that simple and I appreciate that. I did not think of those ideas, thanks!
Well, totally bummed out!!! I have everything together, although the temp gauge is cooked (still trying to find a replacement). Cluster is back...
Are you able to take an ohm reading between the two studs? Should read around 20 ohms. If so, your asking price?
PM sent, thanks for responding.
Hi Ben, I’m still interested in a fuel gauge, let me know, thanks!
Dingleberries. More uniform, scratches less deep than the stone flex hone. My two cents, Rani.
My wife would not touch that....no greens. Me, however, I’d ask for seconds!
Cool garage, cooler cars! And God bless you for your service and continued personal progress.
Why Nickleback? :lol:
