Separate names with a comma.
The link needs a hyphen. Car-part.com
Man that is some loaded questions. Just make sure you do not load up the wheel to hub mounting surface. Too much material at the mounting surface...
I'll go for that.
In my book, that's a wheel cover too. Hub cap goes on the hub. Keeps the dirt out and the grease in.
They look like good old fashioned Modern American Racing Wheels. Google it
Guess I wasn't thinking 4 inch bolt pattern, Coker might not have those.
https://www.cokertire.com/wheels.html?gclid=Cj0KCQiAvJXxBRCeARIsAMSkAppZLlIyWHWMHt3JtWM8lTKcIiICQInFNd4eGEz8JEqJh5o85rWxcjgaAsAgEALw_wcB
6 of one half dozen of the other. I'd mount them. Takes up less space and ready to go when you need them.
Ford and Chevy guys just use a cutting torch on the left side.
Chebby guy gave me a 8 3/4 with two broken wheel studs and what was left of the wheel he cut off with a torch. The other three came off just fine....
How bad is it? I'm sure there is some tolerance.
Are we looking at the same car?
Hildebran. probably jd wheels replicas. Love em.
Another thing too guys. If you paint your wheels, make sure there is no paint where the wheel contacts the mating surface. Ie. rotor or drum.Iif...
I was given an 8 3/4 that had 2 busted studs on the left side. After that they just cut the wheel off with a torch. The other three came right...
I always run the max of what the tire says on passenger cars. Trucks, well you just gotta use your head. I adjust for loads. I run less in the...
Shouldn't cost too much to have em built.
Damit. I really want to run neon rims on my barracuda. :lol:
It is really close. I could see a little machining to the right wheel and an oversized nut making it work.
Almost.
After revisiting the original post, I realized the rolling of the lip is already done.
Guiding a baseball bat while rotating the tire rolls the lip nicely but you will probably break the paint.
Steel wheels can be straightened. Almost a lost art. The first step is to make sure the area where the wheel hits the hub is straight. That is...
Insufficient caster can cause high speed shimmy. Loose idler arm too.
I have always likes this idea. This is the reason I always return the customers wheel back to its original position. I have not seen this...
Yup. Fugly. Try painting the trim ring shiny black. Might help.
Oh yes. I would like to see the rings in black chrome too.
Stockton Wheel - Products OEM Mopar - Mopar Police - Mopar Rally. This is the most confusing, hijacked thread I have ever encountered. Is there a...
Rattle can is rattle can. If you can find the color you want in say krylon or rustoleum enamel, your are getting the same product. The appeal for...