Separate names with a comma.
If the amperage draw is close to what the stock components can draw, I don't see what difference it makes to the ammeter as to what output the...
And make sure the bulkhead connection is clean. Fuse panel too.
Running a lead parallel to a harness is a no no too. I gently welded door hinges together once. Ground on the body and welding on the door.:realcrazy:
Thats a DVOM it uses diodes. 12.5 times .5 equals 6.25. 6.25 plus 12.5 equals 18.75. failed diode.
Me too :rofl: HA opened yourself up for that one brohamdog
You guys need more practice if you cant find the hole in the dark. Lol[ATTACH]
iceignition.com I have no experience with them or do I know much about racing ignitions but they do get great reviews. As far as I can tell just...
I bought a car with the speculation of flipping it. 65 Impala. The fuse block had more 1/4 inch bolts in it than it had fuses.
I soda blasted the...
I make my own out of the little metal strip from an old windshield wiper. The kit would be nice.
Depress is not the right word. You are creating a ramp for the retaining tang to slide over it's retainer.
I'm not very good at explaining. A retaining "tang" needs to be depressed. I have an assortment of thin stainless steel windshield wiper inserts...
I make tools for that out if the little stainless steel strip in old windshield wiper blades. Swapping fuse blocks is prominent in collision repair.
I think you are on your own there . :)
You left out the "tapping on the rally dash bezel" part this time. May have jarred the terminal loose on the gauge. :) My BIL tried that on his...
Leave the jump vehicle hooked up as long as you can.
I know right. Makes it hard to strip the wires. LOL
The Power Probe butane soldering pencil has served me well. Buy the triple filtered butane
Isn't that a wrestling move? lol
I have heard this too. I just have trouble believing it. Something to do with brittleness of the soldered joint I think.
Did you mean coil during cranking AJ ?
I wont be much help but are you using the ballast resistor?
Good point. You still need to remove the plug wires from the equation.
Eliminate the plug wires through an ohm test. Suspect the new modification.
How many relays you see on that old girl?
Get out of your head that electricity flows from positive to negative. Electricity does what it wants to do.We just give it direction
I am no expert but grounding (not grounding) will find its way through other circuits and activate them seeking a ground unnecessary in that circuit
And if that doesn't work.. check the grounds