Separate names with a comma.
Is it a MSD distributor
Something Else?However, it sound likely to be wiring issue in the car
from your text.
I will take an offer a little less but not a bunch!
Still a couple left!
Selling some of my 100 plus thermoquads in a couple weeks!
With tears in my eyes = I have to report that my good friend
and fellow Vegas A Body Drag Racer - Tony Santos has died.
He was a regular...
These are out of my 9 second Duster
Ran a season times and them went to Indy Stuff
These are the real deal Old School back when made in US
We will be racing back there next year (Lord Willing)
and I will have a couple of crew passes if you are near Indy
or Brainard =...
Looking for a Timing pointer that came on Early A engines that
mounts to a timing cover bolt. I have a Aftermarket cover with no
built in marks...
The 12.2 W was 13.7 Wide as I recall
The 14 was 14 Wide as I remember
If that is factory 68 superstock Dart those were the original fenderwell
produced on that car. Most of those SS/B cars ran 14 x 32 Slicks as I...
I am sorry it a took my son a few minutes to upload the 10 pictures.
If you are interested in the car PM me and I will send you a lot of very...
Here is a pretty nice 1970 H code Stick car.
FE5 Red with Black interior car
Jan 70 Build date
Only 56,000 Miles and it appears correct!
The 67 to 72 mounts on the 318 are identical.
I found a nice set that are still on the engine = Even the rubber biscuits look
OK to use over...
We have machined .150 off the exhaust on the Edelbrock Heads
without issue in Stock/Superstock as well as the Iron "X" heads.You can probably...
I have several sets of those heads.
I am pretty sure no water near there = But
it does not hurt to Sonic test them.
I would not be concerned with...
The look correct to me and I test fit them on my 340 and
they appeared correct.
If they are not correct OR If you are not satisified with them in...
Lien Sale paperwork is only usually only good
for the state it is locate in.
4131 is now sold and shipped!
Right off my 71 DemonGoggle: John Irving Drag Racer
I have a nice pair.
They are getting harder to find now.
I found two in my shop. One cast iron and one aluminum for
small block. But both are 4.35.
4966 is sold and delivered!
Rest are still available!
I have a mint 340 Bellhousing + Are they not all big Bearing
on the early ones? (None OD)
I will measure Monday at shop.
I have a fair one for $25.00 and a pretty
good one for $40.00
But the shipping would be $20 to $25 because of
their size and being fragile.
I noticed that now in my 70's that the ground has got much harder
than it was 30 years ago when I fall. Must be Global Warming!
Any spring shop will have them for 1/4 that.
They do not look exactly like OEM but work fine.
I do ot reuse them but I am a Drag Racer and brutal...
If you put in primary Holley jets = Better get the right size the first time as
you will bugger up the threads (20 vs 24) in the phenolic.
Two sets are sold pending my sending HD Close Up
pictures for their inspection.The last set is very nice as well with not pitting/rust/dings or...