Separate names with a comma.
I just put this one in my 72 Dart with front disc/manual. 15/16 bore makes for a little more pedal travel and better feel on the manual brakes. So...
When I replaced my tank, I bit the bullet and went with stainless steel. Yes it was more expensive, but with ethanol (and its issues attracting...
I got these resistors:https://www.amazon.com/dp/B07RWF466H/?tag=fabo03-20It’s a pack of 10, so just enough to make a 70 ohm, 20 ohm and 10...
More progress. Last night, I put in the RT Engineering IVR. Sure enough, the weird behavior on the gas gauge went away, and the resistor test...
Yeah the new senders from everywhere seem like crap. Luckily I have a nice NOS unit from the 70's, but I'm trying to eliminate all the other...
Finally got some time to get some incremental information on this. I built 3 resistors (10, 20, and 70) and verified them with a digital meter....
Good info -- Thanks! If I had only known how much the Spectras suck, I'd have never thrown out my (still working) original when I changed the...
Many thanks. I will hopefully post results this weekend.
After fixing some more pressing stuff, I'm back on the fuel gauge issue. I'd like to start with the "resistor test" by seeing what readings I get...
Dana67 -- That's interesting and I never thought of that. So you're saying that the original mechanicals (and maybe this allegedly electronic one)...
I was aware that the new senders not accurate. I just wasn't aware that they were actually faulty (ie. they change resistance without the float...
Hi all. Apologies for the long story.I'm on a quest to have a working fuel gauge in my 72 Swinger-- I've read virtually every post on this site...
[ATTACH] [ATTACH] I bought some 72 Dart taillight inners and outers from Mexican Spec. The transaction went fine with excellent communication....
When I replaced the rusty old tank in my 72 Swinger, I thought I was being good boy by ordering a new Spectra sender to go with it. Only after the...
I'd be willing to buy all the lenses if you want to sell them separately.
Does this have the original fuel tank sender? Even if its moderately crusty, I'd be interested.
OK it turns out the head doesn’t have those bigger exhaust ports. Just needed a thick gasket and the slightest bit shaved off the manifold. Now...
Thanks everyone -- especially Professor Fate -- for the input. I'm guessing that as you said, I have a '73+ head that has those extended ports. If...
72 Swinger. 318 Long story short: I had a reman 318 put in the car and it came back with a cracked driver exhaust manifold near where one of the...
Thanks, yeah -- it doesn't seem bad enough to stress about.
Got it all together and zero leaks. Thanks everyone. Never noticed this before, but my pulley isn't exactly true -- has a little warpy wobble to...
Looks like I'm set for now. Thanks everyone.
Thanks as always for sharing the knowledge!
In case anyone was biting their nails waiting for the gripping resolution to this, I got the car back. I got a new pump, pulled and pressed the...
What I'd love to see just for posterity is what that GG White Book says a little further down -- what was the actual manifold that came in my car...
Hah! Someone needs to get their story straight! I don't know much about auto manufacturing, but if 70-71 is correct, then I guess it's possible...
Looks like I have a deal going with str12-340, so I'm good for now. If it doesn't work out, I'll come back to the other offers.Thanks all! This...
Thanks. I replied. Definitely interested.
Thanks. Bonus points if anyone has the shield and/or air heater that bolt onto that manifold.
Long shot here, but would someone have a stock driver side 318 exhaust manifold to replace my cracked one? Stamp on the existing one is 2951123....