Separate names with a comma.
Sounds like it may have had a transfer slot issue and the plate masked the issue. The fuel in the T-slot is quicker at reacting to the initial...
Always a first time. Its also how you learn.Good Luck.
No just drill it out on the other side. Find a 72 model and copy the calibration.
Converting a square bore to spread bore:racingfuelsystems-My modified LS intake...now Quadrajet ready
A poor ignition can create the appearance of a an overly rich mixture. Make sure that's it operating as it should and that the alternator is...
Great little vid. I suspect the dimples in the air valve are there to keep the pressure there consistent when the air valve is at 90 degrees from...
Good. You shouldn't be tuning to a number but a state. When you get the idle right you can get it so it only drops 50 rpm from neutral to in gear.
It went 12.6 straight after when I fixed the throttle cable and the engine got all of the secondaries opened.
What's the initial and total timing again?
I agree but again there is more to detonation than just cylinder pressure. Are you suggesting he pull the engine apart and change the compression...
No VVT. Just a very smart operator that understood more about carbs and combustion than anyone else I've come across with the exception of maybe...
That reminds me BLP offer slabbed throttle shafts for increased air flow: 4150 Pri Shaft Thinned/ Coated Thinned shaft [102264-BX1] - $42.99 :...
Nope.
Is that yellow or tan on the strap?Next time you take photos of plugs wrap them in your hand and take a close up so we can see what it looks...
People have run much more than that and there are other factors involved than just cylinder pressure.240 psi on pump is possible when you know...
Do the spark plugs correspond to the AFR?
Źzzzzzzzzzzzzzzzzzzzzzzzz........the sound the reel makes when the fish takes the bait:rofl:
Fuck that's funny. Then I looked at your avatar, laughed and thought. A horse walks into a bar and the bartender asks "what's with the long...
Glad you said it. :rofl:
Is it me or are people more wound up than usual lately?
I think I paid $500 AUD for mine at the time.
Use the later solid fuel metering TQ's. The difference is the use of emulsion vs solid fuel metering.I posted this a long time here:"Holley...
How much did you need to turn them down?
Great to hear your gonna build it yourself! Did they offer any info on calibrations as they usually don't when you get a kit?Keep us posted as I...
Nice. What do you go with?
Try these guys also:Products
What fuel are you planning on using?
Thank God for that. Some one tell that Jackass to keep me on the list.
What would make the most power?
Its clearly related to the power curve difference between the 2 runs between the 2 carbs used. Do I need to post the breakdown of TQ and HP...
