Search results for query: *

All, I'm looking for some new/like new/serviceable Window Sweeps and Fuzzies for my 60 Valiant. Thanks, Marion

After a closer look W19 looks dead on and is for the same years year B body. Anyone see these or have decent used ones?

I found these also at Quirey Quality. Sold by the foot. Looks like it might be a fit in the track. Item W 14.

Pics

All, Going thru my doors on the Valiant and looking for replacement or serviceable window sweeps for a 4 door, but a 2 door might work with mods. I looked around and saw a set on ebay and saw these but the price is quite high. What are folks doing for vintage A Bodys? Thanks, Marion...

I got the card off and tackled the window and door latch issues and glad to report that I freed up all of the widgets inside the door. So know I can open and lock the door and roll up and down the window. Now I need some window fuzzies and a seal if there is one. I need to check the sm.

I wound up borrowing a teaspoon from the kitchen and it worked perfectly. Thanks again to all for the info. I had no idea what was behind there.

More great info. This is how FABO is a great tool for Mopar folks around the world

Thanks for the great pics and details!

I'm getting one from eBay. When I'm done with it I can loan it or sell it. Ill post picks of it when it arrives. No sense in buggering up my door card, its pretty Decent.

here is a good video. I'll go and see if AutoZone has the off the shelf shim style tool.

I found this image of the tool.

I’ll grab one of these maybe if anyone has tried this tool.

Here are the details from the sm.

Yes used to use photo bucket a while back.

Dan, Thanks for the reply. I have some trim tools and a small flat top screw driver that has a 90 degree bend at the top end. Wish I could see the back side. I’ll look and see at he manual and take a screen shot and post it here. Yes the door card is bowed inward. I can push it back and see...

Thanks! I picked up some qa1 sleeves and some pro form tie rods from Summit along with the lower control arms and strut rods all qa1 also.

Nice and Tender.

Hi, Which solid sleeve did you use? QA1? For what make and model? The C body end is 74 and up correct? Fury, Imperial, Newport. Thanks, Marion

Hey, I'm running the II on my /6. Did not need a rev limiter as I have a MSD 6AL. Is there a III for Mopars? I can say that the II works great. The pedal is very crisp and starts right now. Sorry not the answer you needed but you get a bump! Marion

All, I finishing up my QA1 control arm and strut rod upgrades. I was also interested in upgrading the ties rods. I read over the article and it indicates tha a 1974 and up tie rod setup is used. Does any one have a good part number(s) for the assembly needed to swap out the stockers? Are...

All, I have a issue with removing the passenger door card to get at the internals. The window crank is stuck up, and the door latch is inop from the inside. These do not have a screw(s). I pushed back the door card to see in behind the handles and do not see the retainer clip. It must be...

All, I have a issue with removing the passenger door card to get at the internals. The window crank is stuck up, and the door latch is inop from the inside. These do not have a screw(s). I pushed back the door card to see in behind the handles and do not see the retainer clip. It must be...

There are Valiant floor pans for sale on ebay that say 61-65 if I recall.

Sink your teeth into some Frank Marino "Strange Dreams" Turn this bad boy Up!

All You Rockers! I have to share this cover of Hocus Pocus Live with the Buddy Guy Band! Rock on Bishes!

After 6 turns ccw It’s set down better and the camber looks ok still

It needs to settle and I will drive a bit when the weather dries up.

Here is how it looks now with the tires and rims. I need to drop the front it looks like. This is with the adapters until the new Wilwood kit goes on. So the riming not so much as this setup will tuck back inboard with the brakes as the adapter has a 1 inch spacer. It looks much improved and...

My 73 Dart has a hole on the corner of the fuel tank that a ground strap connects to and runs to the frame rail. Same thing only different?