Search results for query: *

One thing to consider, You say you are going to wrap your Car? Thats fine but what if you get tired of your wrap and want to change to a different colour or No wrap. Then what do you do with your wrap colour engine bay? I'm not a fan of Black engine bays myself but that would be the best way for...

Depending how the Snap rings are installed is very Important. The open end of the snap ring should be at the bottom of the pin hole. That way when you have the explosion due to firing of the cylinder. It puts pressure pushing down on the piston and Pin retainers and if the open part of the snap...

I never expected for it to be cheap!!!! There is not much cheap about restoring a car that’s 50 years old

Thanks

Anyone know a Quality place to get Das Pads Restored? I have a few in different colours but some have cracks and other deficiancys

I don't know if you guys in the USA can get this or not, Shell Telus 22 is a excellent light Hydraulic fluid and it is clear. It works great in Convertible tops. Like was noted above to work it up and down to eliminate air pockets

I have one that is restored in the For Sale Section

That metal piece that is Red is the trunk lid. I have seen it painted Red and seen them painted body colour. Either way is good or a personal preference. Some paint it red to match the tail lights

You have to hold one or the other, If you put it in gear as you were told and the driveshaft is connected then the input shaft will not turn. Then when you rotate the engine it should line up and slide in as long as you don’t have other issues. Other than that do as you were told and jack up the...

I like it too but stripes make it stand out for what it is

That you will not know until you get into it. From just restoring one I see quite a bit different from Original but that doesn’t matter to a lot of people as long as they have a M Code car. I know a lot of people would not do it back to Original so it really wouldn’t matter. You could install...

It is missing quite a few items but it is a good car for tweaking to make it right to the buyer who has the knowledge to finish the car correct.

This is Correct

1967 Barracuda Center Finish Panel, This panel is NOS, Still original wrapping paper from Chrysler, This is for a high end restoration or concours restoration. 2000.00 US plus Shipping. Will be packaged in a Shipping tube for protection

I have a few 50.00. Plus the ride

I have a brand new one in the box with pickup and dipstick

It was neither one of those 2, My installer supplied mine but he said there not around anymore

I have a 67, It is in the For Sale section

If anyone is still looking for this shield, I had ordered one from year one and I have it available to anyone that can use it. It’s brand new from Year one. Send me a PM if you want it

Year One has it listed in ther website. Part # UQ46

I Have a set of Head pipes that I got off of Accurate years ago for my M Code Cuda. I was at Mopars at the strip and they said they were for a Dart but would work ona Cuda. Bought them, Hung them on my wall till needed for my restoration. No they don't fit a Cuda. Contacted Accurate and they...

What you can try, and it did work on my 16 Ram. Take your keyfob and push the start button with the key fob. Not sure what it does but it works with mine when it doesn't recognize the fob.( I got this information from the Service Manager at the local Ram Dealer) Also if you are in a area where...

I shortened the tubes, Ordered Moser axles to fit (Small bolt pattern) and Installed the original 8 3/4 brakes. Fit perfectly

I found on mine I worked at it for weeks to get the alignment what I felt was correct. After that I took it to the place to get the top installed. They said it probably needs the top installed. We installed the top and everything lined up perfectly where I had aligned it to. It needs the top on...

How about crankcase pressure, Has your shop checked that? Or crankshaft end play?

This is my 67 Formula S

Should put the rear view mirror up by the driver, not the back window and turn it around

If you have drained your coolant, How clean was the bucket you drained it into? Little oil residue in a bucket will give you your sheen on the coolant

Scoops for what

Well I’m probably the furthest away from OE Correct. My last Build was a 69 Cuda 440 M Code that I did a 10 year resto on and yes it is better than OE but my other cars I built back in the 70s 80s 90s and far from OE Correct