Search results for query: *

Not a trans. guy but i have a manual valve body in my 904 and you have to manually pull down shift lever to get into first gear. If not done it stays in third gear.

If it is basically a stock system a universal system should work good.

Frodee,where did you get the GPS unit? That is what i need. Thanks

Thank you,now iknow. Had a feeling it was in the head.

Cable was new three years ago(very low miles since install)

72 dart with a 904 trans. The odometer works as it should(recording mileage) The speedometer(gauge needle)does not work properly. Just sitting it reads about 50mph and goes up or down as it is driven. Cable problem? gear problem?Thoughts.

Yes a Mopar Battery. I did not want to push my luck,thats why i changed it out.

The original in my durango went eight years, so i went with another AGM. It is also a pain to change it out.

I had my 72 dart re-arched several years ago and they are as good today as they were when done.

It is your car,do what YOU want.

Yes on the ride quality,also are they leaking fluid?

I had mine done in regular roll fiberglass,AFTER it was built. It does make a difference in summer winter not so much. Our temps. are similar to yours. I have been pleased with mine.

Love the willis coupe,look FAST sitting still.

Does anyone make a jute carpet padding kit for a-bodys? Looking to put carpeting in and want descent padding under it. Any suggestions? Thanks

Beautiful work!!!

Good idea Dana67,might try that.

That is what i did before(epoxy) and it worked until i took it off.

Several of the door panel clip slots are broken(gone). Is there a way to carefully cut out and replace the backing? The front material is in good condition(driver quality).I dont want to replace the whole panel if i can fix it.

If you have someone in your area that does spring rearcing check with them.

Check bottom radiator hose,it could be collapsed.

That is a DEFINATE NOOOO!!

Yes looking for steel hood. Dont need perfect,painted etc. hood. I have a scoop i would like to mount. What have you got?

Thank you. BTW it was sold anyway.

Will the hood from a 71 valiant work on a 72 dart? I know the design (center piece)is different but will it fit otherwise? I have a hood scoop to put on it so a lot will be covered.

It is the left side fresh air vent!!

If you have a service manual it should show everthing you need to help.

What is your price for the hood? If you just have the hood latch panel,dont need that . Sorry.

Thanks think i will pass.

How tight is the arm at the base? mine is loose why i ask.

A-56 asked about plugs. I pulled #1,3,5,7. #1&3 are pink,#5 is light tan #7 The porclyn tip is white,but pulg is also wet(i believe oil)