Search results for query: *

1972 Chevrolet Service Manual NEW Factory Manual for Chevy, Chevelle, Nova, Camaro, Corvette, Monte Carlo Brand new, never used as a reference Lists for $35 retail and about $30 on ebay Sell for $25 plus media mail shipping from New Jersey Thanks, Phil

What is the Correct carb gasket for an Eddie LD340 and a new AVS 2 carb? New carb came with an open gasket, vs 4 openings gasket on a stock square bore carb and manifold.AVS2 is a square bore carb like original AVS The LD340 is a dual plane plenum with a small notch between the plenum divider...

Carter AVS Carb 4639S Dated L3 November 1968 Code is appropriate for 1969 Cuda, Dart 340s automatic with AC Was in storage since the 1980's All parts move as appropriate, has all throttle parts and fuel intake Overall in good condition For rebuild $150 or offer plus shipping Ships from...

340 Small Block Electronic Distributor # 3656771 dated 3rd week 1973 Needs a good cleaning and possible some new parts Good rebuild candidate if you need a date correct distributor for your 1973 340 Wiring intact and in good condition No play in the distributor shaft Had in storage as an...

Carter AVS Carb 4639S Dated L3 November 1968 Code is appropriate for 1969 Cuda, Dart 340s automatic with AC Was in storage since the 1980's All parts move as appropriate, has all throttle parts and fuel intake For rebuild $150 or offer plus shipping Ships from Parsippany, NJ 07054 or pick...

Thank you all for the replies. Never used a degree wheel before and always relied on dot to dot, even when I installed 284 purple shaft cams years ago. Time to learn a new skill

Purchased a 360 from Mabco to put into my A66 340 Challenger short term while I pull the 340 for a rebuild. I bought a hp version with flat top pistons and installed hp cam sited as a 272 cam Cam specs; 272-272 duration 454 lift 110 lobe separation 52 degrees overlap, 216 216 duration @ .50...

Here is a pic of the little gasket "wings" that go on the edges of the oil pan lip on each side of the rubber gasket!

Interesting discussion on the Mopar 340 heads. I finally started to give my Challenger A66 engine some love after sitting and not started for over 20 years. Both of my heads are 915 heads. Driver's side head; dated 12/03/69 and is an O head. The passenger side; dated 2/11/70 and is a U head...

Working on our cars is definitely a labor of love. I have owned my A-66 vert since 1979 and it is a "member of the family". The cost of labor for mechanics and body work is very high. I could not see myself letting it ever go! Understandably, no one wants to work for nothing. Unless you have...

FABO Thanks for the ad 1968 Mopar Parts Book sold I have 1972, 73 and 74 Original Mopar Parts Books still available. PM for information Thanks Phil

Selling off my 1968 Original Mopar Master Parts Book Dated March 1969 Book is in excellent condition and in an older Mopar binder (pages are a little yellow) I bought my parts books many years ago, finally letting some of them go. This one is very clean I have 1968, (1969-SOLD),(the 70-71...

Selling off my 1968 Original Mopar Master Parts Book Dated March 1969 Book is in excellent condition and in older Mopar binder (pages are a little yellow) I bought my parts books many years ago, finally letting some of them go. This one is very clean I have 1968, (1969-SOLD),(the 70-71...

I took your suggestion and purchased these tools Worked GREAT and made my job much easier on my A66 Challenger vert front end rebuild.

Thank you to hemi71x for your idea on removing the LCA bushing shell I am in the process of doing this. Just pressed out the bushing and inner sleeve and ready to go!

I know there are limitations on what can be bought. This 25% is good on one purchase and only for the Labor Day weekend. I would go to the store and check out if you can use it. The other option is go on-line and see if they accept the coupon for the purchase you are looking at. They are...

He will be missed.

I know this is an old thread, but it contains great information. Just bought one of the 12 ton harbor freight units. With the 20% off, it cost me $115. This Labor Day, HF has a 25% coupon they have been giving out in the stores. Good time to buy a press or something else that's needed.

Engine looks great. It will be a while before my 340 engine compartment looks that good!

Thank you for the useful information. The 1968 - 1970 340 models only with manifold casting #2863549. uses part number 3004574.

looks to be in good condition

Great information 340 challconv