Separate names with a comma.
Mancini had the best price.
Thanks for info
Ordered from Mancini last night need them to install before filling the block next week .
Yes an Honor to have some of Gliddens parts .[ATTACH]
Yep looks like thats whats going to happen
Who has the best price for above product ???
Yes alum allowed we just have to add 100 pounds to car weight and paint the heads.
Yes sir good point !!
The only limitations imposed on cyl heads is stock valve angle and no off set rockers allowed .
Yes sir thank you !!
I have some decent alum heads to use but was just considering keeping these since they are getting kinda hard to find .
I will get info tonight
Maybe the heads are original ???
Hopefully they are 2.02 that would be nice
Thank you Sir
Ok thank you Sir
They could be original to motor then ###
I was told and again undocumented
That entire driveline came from a 70 Duster .
Going to unload the 340 but keeping cyl heads
Exh manifolds .[ATTACH]
My 340 is a 1970 model according to casting # on the block !
This is my casting number for the block
Im assuming with numbers I listed I have a set of 71
360 heads on my engine ?[ATTACH]
I do have a 70
340 I ran the numbers last week.
I guess I want know valve size until I pull the heads and measure them
Im fixing to sale the 340 minus intake and heads and exh manifolds so I...
Ok not sure just looked tonight
All weights are with driver
9.50 lbs per CI .
Ok so just tonight I finally pulled valve covers to see what cyl heads my 340 has on it and I found the following casting numbers # 3418915
Good assumption but we are not allowed any off set rockers so to be legal I cant run them - and must be stock valve angle !!!
I have some new rpm...
Direct Connection book has foot notes saying cast casts were used in Competition etc.
Good info thank you
In my.caseI haven't a clue
I dont know how to tell the difference in car and truck blocks.
Thank you Sir
Yes do it right the first time.
Even the early LA cast cranks are good quality and would survive just fine in most applicarions..
Lakewood is out of business I was told