Separate names with a comma.
My 64 a few years back[ATTACH]
Just finished an aw-shit on my 68 GTS. Had a constant exhaust tic on the driver side manifold. I tightened the nut and heard a distinct crack....
I'd like to add he could also bolt on an Edelbrock D4B. If possible maybe switch the heads to 920s. With stainless valves the flow excellent. Of...
I think the op is referring to the head pipes. The head pipes come off the exhaust manifold. Accurate makes a nice set of head pipes that have all...
Give Dick at Accurate Ltd a call
1. Find a set of 920 heads. Run stainless valves. You'll have to cut a set of 1.88s down to 1.84. The exhaust should be find. No need for hardened...
67-69 Turquoise. At some point, probably mid year they went to Blue. I've seen an original survivor 69 Swinger 340 car that had an orange engine....
You need a machined spacer to make the smaller torque converter snout work with the large crank register
Short of replacement take it off and run a grinder over the sharp edges to prevent it from getting hairline fractures. Then cross your fingers...
http://arpinstructions.com/generaltorque.html
Edelbrock Performer is a good Chevy intake. Stick with the LD4B. as as a cam, the old Isky E4 grind was good. It was a soldid cam however it...
Kick down is on the wrong side
So far he hasn't PM'd me.
I have a set of forged .030 TRW L2222s. Tops have been milled down to get some reasonable CR out of them. Was planning another 273 build but...
Send me a PM. I live here in Yakima. We have a local 273 expert here that maybe will give you some guidance.
Like this?
check for vacume leaks.
We took and cut some 1.88s down to 1.84's on my 273 with no problems. I'm usining the L2222 pistons. If you take the stock stats on the Hipo 273...
I have a set of TRW L2222 forged pistons for sale that have been cut down for that purpose. What size intake valves?Taken off an article I...
I ahve a build that is pretty much the same as yours. I used the 8.8cr flat tops. Used the E4, Accurate exhaust etc. As a side note I used a...
If you are running the 273 you'll want the Edelbrock LD4B. That manifold has the smaller runners for the 273 heads. If you are running the 318...
What is a 273 Super Commando?
The one question that hasn't been asked is what are going to do with the car? Drag race, autocross, street?? Sounds to me it's more of a street...
The secret to making the 273 buzz is lots of gear in the butt
I belive he holds the NHRA record at 10.68. He ran that at Brainard in August
You can check out my project. PM me if you have questions on the engine build.
Buddy of mine has a flow bench and actually flow tested the LD4B. I'll ask him this evening what the numbers are.
my 273
It's not the money as much as it is experience, knowledge and skills in getting the car to go fast. There a lot of things you can do to get the...
