Separate names with a comma.
And there you go!
That is what I did. I down loaded it and it is on my Desk top at home. Can't tell you how many times I have refereed to it over the years. It's...
Wow,thread brought back from the dead! 5 1/2 years. But yes it should be the same on your 67.
From dealing with both pin on and hinged in my lifetime, I can tell you lift off is a major pain in the Butt. My 69 Dart has a bolt of AAR 6 pack...
Most lift off hoods and deck lids are race weight. As such I don't think any feasible about of added material would be enough to support the...
Where you at in Fl.? I know I have one and might have a pair.
I agree 100% with this method. This is the same way I remove front and rear glass if the glass is worth saving? After many years glass will get...
I have a set. But your miles away from me.
Many years ago cutting inner fenderwells out of a donor was our only choice. Now days you can buy new ones.
Auto Metal Direct 250-1572-P: 72-74...
Aluminum will not look right. You need more of a flat silver. Maybe someone has done it in the past and will chime in.
Originally the Arms were a matt silver. Does your car use 16"?
Yes if you use American Express. Visa? No, I had a problem with very poor quality from P&G classics on some 69 Dart Retored dash bezels. Visa...
See Mark, I told you I had never seen one on a Mopar from the factory.
I have a roof on a 69 Dart HT parts car. But I'm in Fl.
First and the most important think to consider is, ARE THE FRAME RAILS, ALL 4 AND TORSION CROSS MEMBER SOLID? If not do not consider driving and...
Your blades should have come with the adapter for your arms. Anco part number is 48-12. I have replacement blades for sale if your interested....
I'm not sure I follow, your blades should slip right over your arms and snap on?
I checked and don't find a code similar to that. It has a late build date of December 12 1969.
I have several 68,69,70,71,72 doors. I can take one as far north as Perry Ga. If your interested.
Is it on the data plate? I never found a build sheet in this car.
My 69 Dart has the 3 speed wipers with foot pump washers.
Certainly, I bought them for my 69 Dart and 68 Barracuda.
Anco RDB-15. I was looking at the old receipt earlier tonight.
If you want to buy the whole wiper blade. Rock Auto had them at a close out deal. I bought 10 of them. Not sure if they still have the same deal...
Correct. My 69 has 67 fenders, mounting the 69 grill in the 67 fenders is more than a little work!
Contact him by email. email@example.com
There is a member on here that sells them. I have heard that Omni and Horizon springs will work also.
Rear axle codes are not covered in the book I have. But being a 318 Auto, it's a pretty sure bet it came with a 7.25.
BH29= Barracuda-High-2door sports top
41= 318 2 bl.
5= 3speed automatic
307= Build date March 7 1968
Vehicle order number=279246...
As they say, anything is possible, but A sedan roof is completely different.If you were closer I have a 68 and a 69 Dart HT. I could cut the roof...