Separate names with a comma.
I have one. also just the gears if you want to build your own. Not close to you though.
Here are some pictures of the custom BB/SB K-Member. The mounts unbolt, turn 180 and bolt back for the two different engines.[ATTACH][ATTACH]...
If still needed I have some later ones 67 up.
So you need one of each?
I have a spool mount K member that was modified like that by a friend of mine. One direction they fit a SB, unbolt them and turn them around and...
Shame you don't need rears, I have a pair of 14x9 aluminum slots. I have several steel 14 SBP.
I have several. PM me your address and I'll mail them to you.
The part number your looking for is 2785614.
Got it too.
I have 2 Edelbrock 340 Torker intakes.
Actually they make three different length factory snubbers. I have all three. Which one do you need?
Just the MW port Stage VI. They relocated the intake pushrod location. That is the reason the intakes need to be .450 offset.
Do they have a crane part number on them?
Interested in a Torker intake?
This is what they look like.
MOPAR CHRYSLER DODGE 8 3/4" DIFFERENTIAL POWER/LOCK INTERNAL GEAR SET 30 SPLINE | eBay
It is a Dana power loc for the 8 3/4 or the clutch type. 1968 and older.
Don't have those. But Ken above has them. Great guy to deal with, I have many times.
I'm in need of 3 of the cross bars that the 4 small spider gears ride on. I know Dr Diff sell the complete kit. But all I need are the bars they...
Hold down spacers? Or the round ones.
I have some in Fl. But I won't be home till the 1st.
I have several. In Fl.
The discontinued MP numbers are P4876440 for the 1.6 and P4876438 for the 1.5.
Yes I can Special order them, but I was hoping to find a set someone bought and didn't use. The intakes are the only thing different the exhaust...
No these were a new set of castings I had Jim Laroy and his son Cody port and build for me. They do flow well.
I need a set of 8 intake only 1.5 or 1.6 Aluminum rockers for the Stage VI 5249579 Max Wedge heads. They take a special .450-.465 offset intake...