Separate names with a comma.
I purchased the same connectors. Except it took 6 weeks to get mine. A little fact that was not made clear at the time of purchase. They take...
This is on my 68 Barracuda.[ATTACH]
Does sound like a ground issue. Have you taken the wire off the sender and grounded it with the ignition on? It should go to full and stay there.
Disconnected, Mine seem to set for a while. I use a red top Optima in both 68 Barracuda and 69 Dart. Dart battery is13 years old.
I didn't catch that part. Your right if the front is good, it has to be in the rear harness. It runs down the left side inside. Should be a plug...
If it all checks out, then your turn signal switch is more than like bad.
This is what the 2 speed wiring harness looks like.
[FOR SALE] - A- body 2 speed wiper wiring harness
Well that is good to hear. Glad you got it running good. Now about that transmission issue! If it ain't one thing it's another!
I doubt your volt meter has a dwell meter. Since the use of points has all but disappeared, finding a new dwell meter may not be easy. Flea...
If you have a set of feeler gauges set at .017. Then check the dwell with a meter. This should get you close to 28-32 degrees.
Well then I don't know why it's doing that. Mine was the arm 180 out and all I had to do was remove the wiper motor and reinstall the arm 180 from...
I had the same problem on my 69 Dart. What has happened is you bolted the arm on the motor 180 degrees out.
Says he has a B&M shifter in post 1. So must be an auto.
Yeah, what he^^^^^^ said!
What year car are you working on?
Maybe when you have his distributor out you can post a picture or video showing the plate moving with a vacuum source? I'm curious too.
Were you hooking it up to manifold vacuum or a ported vacuum source?
If the plate is moving when vacuum is applied ithas to be advancing. I'm guessing the advance is locked out?
Great send them to me. I'll bring them back to life!
Red top Optima's . I can't tell you long they last cause my oldest one is still going at 12 years old!
No make three, I need to add some support to my Power master alt. in post 5.
I used a 1 wire power master alternator that I had to mount up side down and then I took and altered the original alt. adjuster and mounted it on...
Go to the MSD web site. You can print out a wiring diagram for any MSD product.
There is a chance that you have a 68 or earlier valve body in your 904. The rooster comb that operates neutral safety switch and back up lights is...
They also came in different lengths. A SFE 20 might be longer then a AGC 20.
Well if it helps, I have an extra "HI" note horn and need a "LO" note for my barracuda.Trade?
This article explains it all. Read it.
Chrysler Electronic Ignition System
This article will help trouble shoot your ignition.
Replacing electronic ignition completely in 1970s-1980s Chrysler, Dodge, and Plymouth cars and...
This will show you how.
MyMopar - Mopar Forums & Information - Mopar Ballast Resistor Test
Sounds like you may have a bad ballast resistor.