Search results for query: *

  1. convx4

    [WANTED] 11X2 Spreader and Park Brake Lever

    Classic industries has 11" also. I'll let you look up the part numbers.
  2. convx4

    [WANTED] 11X2 Spreader and Park Brake Lever

    Classic industries has them BRAKE STRUT 10"B-body MN431003 $27 PAIR BRAKE ACTUATOR LEVER 10" B-BODY MN431006 $47 PAIR
  3. convx4

    [WANTED] 8.75-8 3/4 Rust Pit Free 1970-2 A Body Housing $1000.00

    I narrow and straiten 8 3/4. This one I'm putting together right now. For me its easier to body work/ grind the rust out then DA the finish, because its thicker metal.
  4. convx4

    [Found!] SBP 8 3/4” Backing Plates

    I believe that I have a pair of SBP 8 3/4 backing plates, I'll have to look for them. E-mail me a t convx4 at I don't always log on when I visit FABO
  5. convx4

    [WANTED] '66 Signet A/C Control

    If a different five button switch is used the cars wiring will need to be updated to work with the switch. If I was spending your money I would buy a new five button switch and update the wiring.
  6. convx4

    [WANTED] Dakota brake pedal assembly

    I parted out a Dakota, think it was a 96. It was an auto. Should have the brake peddle. Let me get it out and take some pictures. Was there any other associated parts you were looking for?
  7. convx4

    [WANTED] NOS 1971-2 A Body Front 10" Brake Drum #3580534 $250.00

    I have a good used a-body 10" brake drum if interested.
  8. convx4

    [Found!] AC Condenser for 1973

    I think that I have a original style 73. Tomorrow I can get pictures and dimensions.
  9. convx4

    [WANTED] 70 and up 14" Big bolt steel wheels

    Looking for 8 1970 type 14" big bolt pattern Steel wheels, these should have the four nubs to hold the dog dish on. Along with a round center hole and flat ring the lug holes are in. Lug holes need to be good. Not worried about the outer rim. Prefer pick up in the St Louis Mo area. Might...
  10. convx4

    [WANTED] 15x8 wheel small bolt pattern

    If looking for one wheel I have the parts on hand to make one. If you want two I'll have to get some more wheels to make the second. I'm in St Louis Mo. PM me if intrested
  11. convx4

    [WANTED] AC compressor RV2 and small block brackets

    Looking for 60's RV2 Ac compressor with small block brackets. Preferably near St Louis MO. If in St Louis Mo and you just have the compressor I would be interested in just that.
  12. convx4

    [WANTED] Early A body condenser wanted

    Looking for an Early A body condenser. About 22 x 16 with the brackets tabs that measure 24 3/8 x 5 3/4 Should have lines that attach one on each side. I am working on rebuilding the under dash box and this need to complete my system. Thanks
  13. convx4

    [WANTED] AC parts

    Looking for one of each. A v8 and \6.
  14. convx4

    [WANTED] AC parts

    Looking for a metal two piece fan shroud. Also looking for a large diameter ac hard line that hooks to the fire wall. The rubber and other end don't mater.
  15. convx4

    [WANTED] Early A-Body A/C parts

    Parts Wanted: horizontal line dryer ( The one mounted above the passenger wheel in the engine bay) and hard lines connecting to it. Metal fan shroud and mounting brackets for a six cylinder These will be installed on a 1966 valiant Pm me with pictures and price that includes shipping to 63026
  16. convx4

    [WANTED] Driveshaft 70 Dart 340, 4 speed, 8 3/4

    I have my original dart 1970 340 4 speed drive shaft. It has been sand blasted and epoxy primed. If you are willing to speed $500. I'm willing to sell. PM me
  17. convx4

    [WANTED] Question on 70 Dart bucket seat foam

    When I did my 70 dart 15 years ago. The buns offered were not correct. The foam had to be cut for the seam to fit and another layer of foam added under the seat cover to fill it out. I was not happy that new foam was sold for a 70 dart but was really for a duster. This foam and covers was from...
  18. convx4

    [WANTED] 1970 DART Right Rear tailight.

    I have a good used lens. Pm me. Make me am offer with shipping.
  19. convx4

    [WANTED] 70 Dart Tail light lenses

    I have dart and scamp lenses They all have cracks on the lower sections but good. PM me and I'll take some pictures.
  20. convx4

    [WANTED] Early A-body AC parts wanted

    Parts are for my 1966 valiant, dart parts should be the same. The 1967 and older are different. Looking for the horizonal AC dryer and hard lines that sits on the passenger fender well. Also looking for the metal fan shroud for a slant six. The dealer installed under dash units use the...
  21. convx4

    [WANTED] Mopar L body parts

    I have an 85 GLH omni, that needs work if interested located St Louis, Mo.
  22. convx4

    [WANTED] Rear Seat 66 Valiant Conv

    Any rear seat from the same time would work, to repair yours.
  23. convx4

    [SOLD] early a-body a/c actuator

    Parts found Thanks
  24. convx4

    [SOLD] early a-body a/c actuator

    These are my under dash parts that I am working with. I am missing the bracket that holds the temperature slide lever also missing the cable and the fan switch on that bracket. First picture with dash bezel. The temperature controller (Silver) that has a probe that is fed in to the core is...
  25. convx4

    [SOLD] early a-body a/c actuator

    My measurement of 11.5" was with the rod compressed. Mine is exposed to have two ports on it one on each side of the diapharam. I think with the rod pulled out it measured 12.5". The important thing is that the two mounting studs are on the same same side as the rod.
  26. convx4

    [SOLD] early a-body a/c actuator

    One of the nubs that the vacuum hose attaches is broken off on mine. Is there a write up on how to open it up and make the repair? Where do you get replacement parts? Please enlighten me, I'm up for the challenge.
  27. convx4

    [SOLD] early a-body a/c actuator

    I am looking for an early (65-66) a-body A/C actuator. A 67-72 might work. It is vertical actuator that has a rod length of 11 1/2" ( in its retracted position) and has the mounting studs on the same side as the rod. PM through the board. Thanks
  28. convx4

    Looking for A/C dash bezel for a 1966 valiant

    I am having a hard time finding a A/C dash bezel for a 1966 Plymouth valiant. Any one out there got one they want to let go of?