Separate names with a comma.
Tks guys thats him. I wanted to see if he had any tech articles on priority main oiling on Mopar Big Blocks. My memory was just blank on his name.
What is the name of the guy that builds engines on these pages. He has written tech articles and you can subscribe to him. I have bought the kit...
This has turned into a bigger job than I thought. My brother had an E body Combo valve (inline Tube) he had lying around for years but never...
No 73 Plymouth service manual over there.
My cable for brake distribution block is missing. What is the routing of this cable, I assume it ends up at the brake light switch and what does...
Yep I know that most engines are around 80 - 85 however the ARP info says 100 with the studs. I think it will be fine at 80 though
Got back to looking at this 5.7 yesterday. I removed the crank and torqued all caps When I measured clearance t 80 ft pound I had .0025...
Granted some of it was however the brass is damaged and knurled over one one spot. I did have to apply heat when removing some of the flare...
My first job on my newly installed hoist was removing this valve. Was still a pain in the ass because of headers but a lot easier than lying on...
Yep
I took block and crank to machine shop and got it line honed and they checked crank for runout. The crank was fine but the block did in fact need...
Have had a few issues with the brakes and have replaced M/C, just recently had booster rebuilt. couple years ago put kits thru both calipers....
What are the standard bore size for the rear wheel cylinders on a 73 Duster. Its a stock Disc/ Drum setup.My back brakes are savage and lock...
The hoist is a HAPP but I believe they are only Australian. They lift to a total of 6 ft and can lift 4 ton. My enclosed Carport has an internal...
I wouldn't have minded but it was an extra $900
I have an arthritic back and shoulder and now in my mid 50's I finally invested in a 4 post hoist now I have the room to put one. Picked it up...
Want to order one of there rebuild kits however this is the message on his sitePlease note that the USPS has temporarily suspended package...
Because it is only a stock rebuild I got the bores honed, hot tanked and the crank polished.
I put the crank in this engine and torqued it all down. i could turn the crank by hand however it just felt a little tight in one spot. I could...
We have had moggies before and yes they are narcissists but then we got 2 Devon Rex pure breds. They take Narcissism to a whole new level.
Tks I will have a look around for the 6.1 Cam and Exhaust manifolds
Mine is from a 04 Ram I think. I pulled it down and it had a spun bearing on one of the mains. I had cylinders honed, new cam bearings, new...
Ok so I am confused by Dr Diffs bendix style boosters. I added it to the cart but you also have to add a Hemi Style Under Hood Linkage Kit which...
I suspected there was something wrong with it so I took it to a booster rebuilder brakA local booster rebuilder took it apart. There is a...
i bought a rebuilt booster from Rock Auto for my duster and it’s junk. Where can I buy a new booster. Everything I find is universal which is...
Are air bleeds standard sizes across Holley and Quickfuel carbs. I bought a range of them from BLP and wanted to check before using them.
What is this spring called so I can order a replacement.[ATTACH]
Thats a gas issue. I would check for leaks at bottle as well as what Yellow rose has said.
Could it be a combination of things from all comments here. Poor metalurgy, poor oil technology, lack of maintenance - oil changes, some small...
Yeah its off my 58 Imperial. I just changed spring bushings I thought should I change to nyloc but if they work just as good I would leave it alone.
