Separate names with a comma.
I have experience with boosted applications, what you intend to do is not that crazy, since the boost level target is pretty low (4psi). As...
I have considered changing the stock "sport" leaf srpings on my barracuda, they are pretty stiff on rogh roads. Just rebent them to their original...
I have been only once in the racetrack with the barracuda, but I use it daily during rain season on open roads to test its performance :)
I have a manual 4 speed with 1:1 final gear and 2.7 ratio at the differential. Very good for cruising speeds. the 426 stroker has enough torque to...
thanks for the information
if you enable the Closed caption feature in youtube you will have subrtitles in english
thanks for the tip. do you know where to get those steel caps?. I looked for them without success.
excellent info, appreciate the response!
thanks, this is good feedback. I've got the following on my setup:1" torsion bars QA A arms Hotchkis strut bars mopar sub frame connectors...
some links here:[MEDIA] [MEDIA] https://www.youtube.com/channel/UCywMWW2bw6qNMOL9PsS5uuw
hahahaha, thats funny. If you don't stash your weed thereHandling wise, do they actually make the car handle and drive better dor daily...
what about the other reinforcements sold out there?, there are inner fender braces, and core support stiffness brace. Anyone has those on their...
The 440 sounds very interesting.I built my 426 for my barracuda around 4 years ago, very happy with the results. Totally streetable car with...
I think it will end up in the 270 - 330 range.
See attached images of the old 90A alternator (works fine if you dont have that many electronics) and the beefier 120A one from the cherokee....
This is the final result, nice charging voltage with the larger alternator.[ATTACH][ATTACH]
Was the solution something you can purchase or did you fabricated it?.I ask because I have the same issue and got rid of the wiper motor. I...
I have forged and lightweight molnar parts on my stroker build, excellent quality.
if its a shot that has experience on that go ahead, it should work just fine.
just changed the TPS sensor yesterday, since the original edelbrock one had variation at idle when the pedal was not pressed, and the ECU does not...
I drive my 69 barracuda daily during dry season for the past three years, its got a 426 SB stroker and MPFI. Usually most of my driving is highway...
look great!, good find!
I made some measurements and it seems the old alternator was not charging at all. At idle voltage with full charged battery was 11.8-12.0V. I...
this is how it looks[ATTACH]
I run a 2.7 gear ratio on my 4-speed 69 barracuda with a 426 SB stroker and 255 street/strip nitto tires mounted on 17 inch wheels. Currently...
I use a melling high volume pump on my 426 SB stroker, no mods to the oil passages, Edelbrock aluminum heads. 3 years using it and no issues so...
I use a melling high volume pump on my 426 stroker, no mods to the oil passages. 3 years using it and no issues so far, plenty of oil flow.
yes, got a crank and water pump pulleys from a later model 360, should be a magnum, and then got the alternator. Since I have no power steering or...
Im wondering what size of alternator everyone is using. I have a 90amp one from an 80s chrysler vehicle, but yesterday the battery drained after I...
Could it be that this TPS reading happens when you turn the key on with the foot resting on the pedal?
