Separate names with a comma.
[ATTACH] [ATTACH] Took her out to the land to mow. 70 degree day in upstate NY made for a perfect drive.
Got my lights working.[ATTACH]
This problem has been resolved. The wiring from when this motor was installed was a large issue. The mechanic who installed it, was responsible...
That’s the engine that is in my car now. I talked with blueprint and discovered the original crate motor had the gm style hei distributor in it...
[ATTACH] So I discovered my motor originally came with a gm style hei distributor however it was too large to fit in my engine bay so the msd...
Wow probably will drive right by you. Driving down from Rochester NY.
RV show in Hershey PA.
Adv duration on cam is 285 int/297 exh .545 int/.545 exh, .241 int/.247 exh @ .050 with 110 Lsa. Mechanical flat tappet. Hoppy I’ll call as...
Ok so I have another thread in here about troubles with my La based 408 stroker having troubles staying running in gear at low rpm, and what...
Forgive me, I’m a newly retired cop. Definitely not a mechanic. Not good or have any knowledge base in electrical. Small things I’m good with,...
I will buy a voltmeter tomorrow
I think we are more than 3 hours though as I’m in upstate NY.
Thank you for this, I appreciate the help as I’m definitely over my head with this electrical portion and I’m trying to learn on the job. I will...
It SEEMS that the distributor may be the culprit after a day of troubleshooting. After fixing those wiring issues, I bench tested two different...
The two wires added on are a power to choke, and a power going into plug for distributor. Working on fixing this now.
[ATTACH] So I fixed the ground from coil that was shoddy. Then I saw the ballast resistor connection from the driver side had very old electrical...
Thank you for the replies and help. I will check what you said tomorrow and report back
In the case that I need to replace the distributor I was looking at the hei distributor from speedway motors.
And no msd ignition. Just msd distributor with ballast resistor and duralast coil.
Distributor has about 500 miles on it with no oxidation on cap or rotor, and I’ll need to do some research on the last part that you said because...
Getting no spark to the plug. But this is intermittent. Sometimes she starts, sometimes she doesn’t. *18 btdc is what it was timed at before it...
Thank you for the reply. So I did install the regulator with permatex thread sealant, and it leaked like a sieve. I took it off, tightened it up...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
So I’m working with what I have which is a test light. It is my understanding that connected to the negative on coil, touching the test light to...
So today with zero changes and fully charged battery it just turns over and won’t start. Work to do.
Diggin the build, love old mopars regardless if they are stock or people put their own spin on it. I chose the latter with my build. Following.
So I replaced the coil, did not have spark, took the test light to everything. Made sure all connections were tight, turned the key to see if I...
I do have a MSD distributor
So I pulled the wire from distributor to coil off at the distributor and laid it on valve cover to see if it sparked and it did not. I’m confused...
So I’m charging the battery then I’m going to check for myself spark from the coil wire. One thing I notice is when I turn the key off after...
