Separate names with a comma.
regarding the lift failure in post#13 (how appropriate): I would avoid this lift design. all the pressure works to pull the top of the lift...
Some of that stuff is getting hard to find: rear end drum to drum, LCAs with sway bar tabs, Kelsey Hayes brake pieces. Do your homework and you...
No RTV is not what you want, go to the part store and ask for a tube of Thread Sealer. Mop up the oil, pull one bolt at a time, get all the oil...
Sorry, I still can't figure out the quote above... whose rules???
Sorry, I just can't figure out the quote above
Yep, get one every 2 months...
Rules???
Mopar Action is the best all Mopar magazine going. Real tech info and columns, wide variety of cars...
Are we ever really finished with a car? Just make sure you have "one more project" to do and you're home free!
you could drill one right through the brace hole and tap it, but you need a collar on the drill bit to keep from going too deep. you can run the...
is there a second blind hole in your block where the brace ends? I recently installed a new small block in my Dart and it had a threaded hole...
I'm looking for a few parts to top off my new 318 with an AVSII four barrel. I need a new or like new 318 four barrel orange pie tin, and a 1/4"...
looks like you are on the right track. clean it up, set it up and see how it fits with your carb and manifold. You still may need an adapter for...
To answer the OP's initial question, YES you would be Nuts to do that. Waste of money. Best complaint from OP: doesn't want to have to take the...
318 A-body manifold. It started being used in the middle of the 72 model year and then for all in 1973-4
Those pictures are of a three piece kickdown...
one more pic regarding alignment [ATTACH]
OP - Is that really a 4 barrel carb? The pics from the side show a base that doesn't seem large enough front to back... Never mind it's just the...
you missed the rest of the typical thread title: "Looking for 340 cam that runs in the 11s and gets 35 MPG" :lol:
what a deal! Keep you foot in it and you might be able to drive forever!!!
where are you?This bumper is a bit different from AMD as it is drilled for "bumperettes" as shown in the picture above
The trunk lip VINs on my 70 Darts are UNDER the trunk seal on the right side
I think the last one I got came from Jegs - you can tell it's M&H by the part numbers they use and when they arrive they have M&H tags
where is it in WA?
saw a set of "cop wheels" like that last week at a show with rallye cone style (70-71) centers and they looked great... more food for thought
The conical washers are to spread the stress of the bolts on the relatively fragile cast iron manifolds. (how many small block manifolds have you...
4 bbl manifold and carb places the throttle connection stud farther forward than a 2 bbl. You can deal with the throttle bracket by using a...
This all reminds me of all the folks that unloaded their muscle cars in 1973 during the GAS CRISIS, when gas went up to (((gasp))) 42 cents a...
so if the end of those pipes are 1 3/4 ID where they are swelled for the tips, I can only guess how small the actual tailpipe before the swell is...
