Search results for query: *

Those are slick! Good choice

Jeez I’m just now putting 2 & 2 together…. Sorry to hear about this! Mopar A body complete front inner fenders, core support and suspension - auto parts - by owner - vehicle automotive... good luck with this rebuild and glad you are ok!

TV & Movie A-body Mopar search & post NOTE: there are a few of these threads in FABO...

I'm currently researching the ominous A833 conversion and couldn't remember the I.D of that SCAT I put in there. so 5 years ago I glued some 60 grit inside this bit and reamed that torque converter so it wouldn't hang up so bad next time... (carefully not to engage those teeth into my pump)...

That is how I have it now but my breather cap still gets some oil up in the sponge sometimes. ? No kidding! Is there s’posed to be an element or something in this chamber?

The hunt for oil leaks continues… Always a spot under the bell housing so it’s a bit of a relief that it is dry behind the dust shield. (Not the rear main seal). I found little leaks around the bolts on each valve cover, the oil filter, my pcv valve, and a broken o ring on my catch can. (That...

...a bit. Tried a lot of things but it always started again AFTER the gas cooled off! What thermostat do you use? I understand that there is a 195* option so that’s not a problem. Mine will creep up too if I am not moving for several minutes >15. It likes to be in N for those longer periods...

Thanks Mr Steve. My wife was trying to get footage of the launch and keep the rest of our “pit crew” in order. I grabbed a frame from the second time slip. This is the first picture of the theme where the front actually comes up, the back doesn’t squat a bunch, and the tires aren’t just spinning!

And you got My Hood in the shot too! Nice work

After chasing down an oil leak last week, I finally got up to Bremerton for a few runs…(2067) Apparently I forgot when to leave but it was a pretty good night for the orange car!

I think mine came from Classic and don’t remember issues….with the gasket anyway! lol. I used a little silicone in the corners for extra protection. 8 years later no issues. Good luck.

Less philosophy than infliction that frugality. Im in a program to get rid of it. One broken part at a time!!!

My tube actually wiggles when the RTV gives up so I think we know what has to happen first! Thanks again all.

I guess I did say squirt. I run at about 60psi @ 2000rpms. I have it on oil thinners to keep from having a stroke but that darn 30 weight sneaks out where it can! Lol I’m only kinda kidding. I like 20w 50 to prevent leaking but then it runs 100psi when cold!? I traded a pair of clogged breathers...

I am pretty attracted to this idea. Would I have to hone the block a skosh to accept a gas line fitting?

Pretty sure it’s down low. I am able to stop it for long periods with the RTV and if it was squirting out the top I’d have a much bigger mess and maybe even smoke. No oil is getting blown around by the nearby fan at the top of the tube. Just moist down low and leaves a half dollar size puddle...

I have a 1971 340 in my 1968 Barracuda. It’s had a chrome dipstick since I bought the motor or it was on the 1976 360 that was in the car previously and I cannibalized it, I don’t remember. I can clean the block and tube really well, use the black RTV, and can get 5000 miles out of it. Then it...

DON’T BUY THAT 1st PACK OF CIGARETTES! you’ll be much more successful with the ladies early on and you’ll be trying to quit until you’re 40!

I miss going out for good BBQ! My favorites were: The Burger Barn in Jena Louisiana Uncle Henry’s in Sheridan Arkansas and Wade’s (kinda a food truck) Lufkin Texas. We would get his smoked Turkeys for Thanksgiving!!! Mmm At home: Kinders Gold If Buffalo wings aren’t too much a stretch of the...

Mine is not a show piece but I like to enter the one show in town. I’m kinda a blow in and I don’t get many opportunities to meet like minded locals. I think I gave them $10 last year. Funny you mention it cuz someone invariably leaves half a dozen leaflets on the car for other shows and much...

We tried to get to the halibut hole yesterday but the bar was a little too rough. We piddled in the harbor and the marina mostly. Here’s a question; what do ya’ll do with these expired flare cartridges? I can’t imagine hanging on to bunches of them is a good idea and tossing them in the rubbish...

Wow, sorry I missed this one Steve! What did you end up doing? I like the track system idea.

https://arlingtoncemetery.mil/Portals/0/ANC%20History%20Fact%20Sheet.pdf Was just thinking about visiting Arlington as a kid and found this. Thought I’d share it here…

I’m married with two young kids….im always just talking to myself!

You chose a way better day!

Drove down to the Columbia this morning. Lots of twisting mountain roads and MC’Ds for a pit stop in Raymond. I learned that there is a small cruise in there every Thursday at 1. Strange coincidence. We had parked right in their spot as folks were just showing up… had to run home to pick my son...

Astoria today