Search results for query: *

Misc carburetors, see the pictures for condition and base stamping numbers, and enquire as required. Located in the Savannah, Tn area, pm me here for more info and shipping costs. Thanks for viewing... Note...the one 4640 is missing some parts while all others are good rebuildable cores. I...

Rimac makes a great bench unit but they're a little spendy anymore.

Is that Dan's old Gator pond out back?!

Yesterday's plan got interrupted so I'll try to get that verified today.

I have 4 American 'mags' that were on a project Belvedere I recently bought. I'm not sure of the size as I'll remove one tomorrow and check the wheel and tire brand, but they're either 7x17 or 8x17 wheels with 245-45-17 radial tires. These have zero miles on them as the car's not a...

Yup, '68 notch/hardtop...non-fastback and non-drop-top! I don't know as they're in a TMI box. They have burl walnut horizontal panels, very nice looking.

Decent set of swing pedals for '67-later A-body. I don't recall the year but they're decent and complete...$275 plus shipping from the Savannah, Tn area or trade for a set for '66/7 B-body. PM me here if interested and thanks for viewing...wb Note...the 'rust isn't as bad as it looks as it's...

New set of black front or back arm rests w/o ash trays, still sealed in the bags...$75 plus shipping from the Savannah, Tn area. I also have a new set of rear panels for a htp b'cuda in black with wood graing inserts...$175 plus shipping. PM me here if interested and thanks for viewing...wb

Looking for a very nice pair of 625 cfm Carter AFB carburetors. MUST be clean and very nice condition and without damage/modifcations. If you have something as described, please pm me here, thanks...wb

Still not enough to receive PM's...your mailbox is full I'm interested if the other falls through, thanks...wb:thumbsup:

One new set of Comp Cams 10* chromoly steel retainers 740-16 in the package, $85 shipped in the lower 48 states. One new set of Comp Cams 641-16 3/8"-7* single groove valve locks, $35 shipped in the lower 48 One new set of Comp Cams 612-16 3/8"-10* single groove valve locks, $35 shipped in the...

Hmm, $130 shipped? I have some I need to look at tomorrow that are based off Mitsubishi diesel and while they are very good starters they're not as small as these...I'll get back to you sometime tomorrow, thanks...wb

Location Rockford, Ill, he just sent me the pan rail number...1A187851, thanks for your interest...wb

How To Calculate Engine Compression Ratio And Displacement.

Thanks Tyler but I want/need the above listed matching numbers only, no single carbs. Thanks...wb

I have a friend that has a 1971 340 he'd like to sell so here's the scoop on his 340. If you need, contact me here and I'll forward his contact info to you, then. Thanks, much appreciate...wb 1971 Mopar 340 Engine . Run's, will need to be gone through . Block casting number # 2780930 -340-5 ...

Looking for a nice pair of Carter 9625/9626 or 9635/9636 Carter AFB carburetors. No corrosion or nasty carbs, must be decent with no damage or broken parts. If the plating on the linkage pieces is good, that's a big plus but rusty linkage is unacceptable, they must be void of all rust/corrosion...

A very nice pair of 9755S 750 Carter AFB carburetors, bought for my 426H project but not used. These are clean and used but in very nice condition, $450 plus shipping from Savannah, Tn. PM me here if interested, thanks...

Depending on the rods used, 432=3.75 w/6.76 rod, 489=4.250 w/6.535 rod...this info has been added to the above ad.

Standard Chrysler rod journal size, thanks for reminding me, I corrected the ad...wb

This set has been on the shelf for quite a few years...one complete set of 440 Source 383 stroker pistons, 4.274" (+.030"), 1.32" compression height, .990" pins, flat tops with valve reliefs (for approx .700" lift camshaft), made from 2618 T-6 forged aircraft grade aluminum, lands cut for 1/16"...

I have 2 new pairs of Schoenfeld slip-on 3-1/2"x16" collectors for 1-7/8" primary headers. They'll need the tabs welded on when you align them with your primary tubes. $225 plus shipping for both sets, from Savannah, Tn 38372. PM me here if you have an interest and thanks for viewing, much...

New Comp Cams 986-16 dual valve springs with 744-16 retainers. Will work on LA small block chrysler or SL6 engines, $150 plus shipping from Savannah, Tn. PM me here if interested and thanks for viewing this ad...wb

Never used this converter as I quit racing the car after it was repaired and freshened by SpecRite of Redding, Ca. However, they claimed it should flash around 4600-4800 with a 'decent 440', any real race engine (of course) higher. Thanks for your interest...wb

Nice Moroso B/RB chrome valve covers, very nice, no rust or damage, $95 pr Used steel 833 shift forks, $125 pr New steel 833 shift forks $175 pr Fresh 8" A-1 converter with out-of-cert 6 bolt flex plate and bolts, $500 New center sump B/RB oil pan, $120 Chassis Engineering ladder bars with new...

Looking for a set of PEP 6.76 I-beam connecting rods with std 2.5 Chrysler journal bore and .990" pin bushings. PM me if you have something, thanks...wb

A pair of new Smittybilt black bucket seats, similar to the A100 van seats so many SS cars were equipped with, nice looking, need mounting brackets (make them or buy them), $225 plus shipping from Savannah, Tn 38372. Contact me here if you have an interest. Thanks for viewing...wb

1965 Valiant V100, good solid core project car. Looking for a new or excellent Quicktime RM 6078 or 6073 B/RB bellhousing (NO LAKEWOODS please), 15x10 Cragar Super Trick wheels, excellent condition satin finish w/4.5" rear spacing, New Wilwood race disc brakes for B-body, good...

This is the lowest I can and will go, $2250.