Separate names with a comma.
I doubt if any of them really do much beyond improve the appearance for one season.
It really needs to be worked like a highway or the top dries...
may very well be the best auto made? Recoil operated, not gas and near foolproof.
I've had mine since 1967...and yes, the stories it could tell!
I believe these are '66 dart and as you say i don't see any catch or locks for the backs.
...will they match with front '68 mount holes and will...
Tx SS..how would you access the back seat on a 2 door '66 dart with buckets?
...do they just flop forward when required?
Do 66 / 67 A body bench and buckets interchange with 68 / 69? Looks like
only the upholstery patterns differ.
You are correct Rusty.On smooth roads my improved suspension was indeed nice!
...but most of our roads are dreadful so i took the Bilsteins off....
Ride is so subjective.I made mild upgrades to my suspension and it was very nice on good roads.
....but most of our roads are terrible and i ended...
Clayton is in New York State?
zip is 13622
can not find individual listings?found them in Suspension...sect.
how much for set 3 shipped to Clayton 30468
i knew a very large family of Smiths who moved to Saskatoon years ago from Ontario.
about 9 kids who would all be adults now.Wonder what happened...
lo compression 340...be very careful with anything above a stock cam
maybe leave it alone and add a bit of gear or a little higher stall converter.
Just put an add in the wanted section...$750 for all or will part it out
Complete 1970 A body Ralleye Dash
Steel frame, Nice wiring harness, Gauge set w/ 150 mph speedo and uncut straight bezel.
Steel frame probably too...
Actually i have everything.
....steel frame, nice rally dash wiring harness, 150 mph gauge set and 1970
i have an uncut Dart / Duster rally bezel with thumbwheel radio opening...is that '71?
215R7014 front and rear
front wheels are 14 x 5 1\2 small bolt
Rear wheels are 14 x 6 small bolt
I call her "Plain Jane"
if you follow the 1969 service manual you can't put a 245 on the back on any rim.
Yes they fit,i too have run them.Should you ..maybe not.
the H made the exhaust quieter and allowed the factory to use less restrictive mufflers for a performance gain on the big block cars.
On several cars in the 400hp range, our tests revealed a dyno difference of close to 50hp over a decent shop built 2 1/4" and a 2.5" mandrel bent...
what tire, gear and converter are you going to use?
is this going in an A body? i
i know originality is key to our restorations but most would replace that master with a dual outlet piece and set the original aside to keep with...
i think everybody is hoodwinked by 3.55's
i never found them to be a good quarter mile gear or cruising gear.If your cam is too big
and your tires...
I'm drooling over that Black Bandit!
I looked for 2 years for a clean '63 - '65 B Body....finally gave up and bought a '68 Dart which is just fine!
...the first couple of feet of headpipe on the drivers' side is actually 2" to get by the starter and torsion bar, then 2 1/4" to the muffler.
My '69 340 Dart came stock with 2 1/4" duals to the mufflers and 1 7/8" from the mufflers back.I thought the 383 GTS would be the same but i've...