Separate names with a comma.
Are the bucket seat frames from 1976-80 Dodge Aspen/Plymouth Volare similar to earlier (70-76) A body frames? Can they be re-foamed with the...
I must disagree! Large "frameless" fish tanks are made using only glass and silicone sealant -- these can hold hundreds of gallons of water
A couple of pictures for clarification - 74 Duster[ATTACH][ATTACH]
I have 2 Dart hoods -- one is a factory 340 hood (1/2" Holes with 3/8" slots - 3/8" corner holes -- 4 3/16" breather holes). The other hood had...
I have a 1970 Dart Swinger H code 340 4 speed and I am trying to figure out what these holes in the inner trunk lid might be for. They are all...
Interesting to note how much "crisper" the letters are on the OEM parts compared to the repops[ATTACH][ATTACH]
These are from my '74 E58 code Duster (360 cid 4bbl V8). They do not have the mounting studs as above - but rather were affixed to the fender with...
Many thanks -- one of life's mysteries solved
1974 Duster -- when I rotated the Duster on my rotisserie this fell out from under the dashboard. It doesn't appear to have been mounted and shows...
Here is the correct link mentioned above --http://www.magnumswap.com
Legendary Interiors shows this pattern as 1965 Valiant Signet -- Dante's also
Thanks for the reply -- seems the consensus is that these won't work for my application
I have a '71 Dart 340 Swinger 4-speed with stock suspension. Will I be able to run small bolt pattern 15 x 6 rims with 3 1/2" backspace and...
I have PMd you
The motor ID # is stamped on a machined spot on the front of the engine block just below the drivers side head. This should be a match to your...
A bare small block aluminum bell housing weighs in at 12 lbs.
I also have a 75 Dart Sport 360 - but mine is not as heavily optioned as yours. This site has no production numbers but some interesting info FYI...
Trunklid it is!! many thanks for the input
I purchased a 75 Dart Sport in a fairly advanced state of dismantling and I need some help to identify these parts and where they belong on the...
OOPS - I misread the description ahead of the rear wheel -- not behind -- Sorry
AMD makes the patches you need --- Quarter Panel Patches | AMD 755-1370-1L ---- I used these to repair my 75 Dart Sport using panel adhesive....
Has anyone used these shifter rods? Are they any good? They don't seem to be as "Bendy" as the originals. Need them for an early 70s 4speed in my...
I have 2 projects on the go. First is a 74 Duster 360 HD car that the previous owner replaced the 360 with a fully rebuilt Chrysler 413 R/B bored...
