Separate names with a comma.
I work in a custom cabinet shop mostly for new homes and could offer perspective from what I have learned over the years.
I only caught it because I went thru the same deal on my dart. I chose to go with 10" wide rims to still be able to run the exhaust out the back,...
Are the exhaust cut-outs in the rear valance for show only? I see no way of running the exhaust out to those tips.
This is the condition that I found the car in. The car was sitting outside under lean-to of a barn in Mound City Missouri.[ATTACH]
Running the B&M 80706 - B&M Pro Stick Shifter with no issues.[ATTACH]
I have the six-pack hood scoop, but I fiberglassed it on a steel hood with the sheet metal cut out underneath the scoop. I can tell you that you...
Stay away from the re-pops with a fiberglas core as they will warp in sun light.
I bought my 727 from Summit Racing. It came freight so you will have to find a place to have it delivered to.
Looks like a throttle return spring bracket to me.
Mopar MO-090[ATTACH]
So you want me to get my keyboard greasy???
Went by and visited one of my Mopar buddy's today and he gave me this book. 1972 Passenger car parts book.[ATTACH][ATTACH]
Inside and outside![ATTACH]
Yes those are individual copper plates!
My HMS Bounty (not finished) had to dust it off for the pictures.[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]...
My HMS Endeavour[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
Nice Job! I have built a few ship models myself and I know the amount of work and dedication that one has to have to finish one!
Upper right corner of the photo. Looks like a courtesy lamp.[ATTACH]
I found an antenna extension somewhere online and ran it down the side back into the trunk, made an "L" bracket and mounted the antenna sideways...
Found a link to Mopar City in the comments section of that article. MoPar City Experience Weekend
Welded in a piece of sheet metal on my antenna hole and mounted the antenna in the trunk behind the back seat.
Stay away from any company that makes re-pop's with a fiberglass core instead of a metal core. They will warp in the sun!
Found the answer.[ATTACH]
I have never owned one, but wonder if they have any kind of locking mechanism so it couldn't be knocked into reverse by accident.
Sounds like a Lokar might be what your after.[ATTACH]
After looking through the FAQ section on Aeromotives web site, particularly question #7 it's looking like a regulator change will be needed to...
This one from Trick-Flow looks like the same thing
I don't see any part numbers on the regulator so it's a mystery. I did come from this Jeg's kit[ATTACH]
I'll second that! I purchased the dash and engine bay reproduction harnesses for my 71' Dart. Well worth the money and piece of mind!
That's what I'm not sure of. The regulator has (1) inlet and (2) outlets, one of which I currently have the pressure gauge on. which is why I was...
