Separate names with a comma.
For the first timer, porting of a head. I agree with good old Unk Tony.[MEDIA]
Installed my new Pinion snubber last night. The rubber bumper is 1-1/2" tall and the gap between the bumper and the floor is 3/4"(installed in 2nt...
I have a go pro, and have done some under car videos.(that's how i realized my old SS Springs were junk!) I do have a chalk mark on my tires for...
A tube of Urethane and the gun to apply it was more then just buying another one. UPS said delivered Saturday by 7 pm. Still haven't decided if i...
So what do you see wrong with that launch? maybe pulling the wheel up to high???? I agree, that needs to be on a picture frame on your...
I think i will try and glue it back on with some windshield urethane.
I don't think this look right to me.[ATTACH] :BangHead::D
So finally went out and measured my rear end. Was not even 1/16 of a inch off. as far as a tape measure goes it was perfect. Now to what i thing...
When i first clicked on this thread, there was a lot of commercials after your original post. So i thought no one had posted up yet. When i got...
so tell us all your spec on eng converter rear gear slick height exc.
When taking max HP affects(this is not, that, of cores!) you are better to go to a 1.50 exhaust valve, to make room for a much bigger intake...
Thanks, good info. I haven't yet checked the rear for square. At this point, adding a clamp is out of the question as there is not enough...
Way back in the day when i had only my et slips from today and yesterday and simple dial gauge, showing air pressure. I found jetting my car on...
This is just my opinion and other will have there's. Don't touch the floor(looks like it has been clean up a little already).Don't take the bump...
I Couldn't agree more. To anyone replacing there water pump. get some modeling clay behind the water pump and then throw a couple of bolts in....
If you want a HV Water pump from a standard pump. pull the impeller off and repress it on less. aka taking up all the space between the impeller...
Hmm maybe i haven't finished this thread after all.... reading back threw this thread i realize that i haven't got any data recordings after my...
Well i finally took your advice!!! The proform came with 33 squirters, and i went to 35s with little help. Been racing all this time, having too...
oh and GoPro battery was dead.[MEDIA]
Ok finally the race happen and i have video.......Well the video isn't going to help out much on anything that we have been discussing above....
I have a drum of 110 race gas that takes me 2 years to us up. It's in a cool dry place. I am using that bottom of the drum this year. works just fine.
Unfortunately i set them two short video up as "shorts" on you-tube. What i learned is that you can't edit if when you do it that way. aka slow it...
https://www.youtube.com/shorts/tyShN0MWgO4https://www.youtube.com/shorts/4I672b3dtWI
So we had a small tire/ big tire street outlaw type race a Hypoxia today. you guys said that i should video the back of other race cars(being a...
Agree.
5600 esh with my now 28" tires and 4.56 gears. would like to go back to my 26" slick, now that i have learn a thing or two, about making this...
4.56s 26" slicks at the time of converter change Also 1/8 mile trap/ track.
Here is a couple of links that talk about leaf spring cars that might help. [MEDIA][MEDIA]
I don't know about converter slip % but, my cheep 3000 stall converter, when through the traps at 6000 rpm. My high dollar 4200 stall converter,...
The tire on the right is the one that i was trying to get to hook in the first video. Hmm ok the bottom of the picture. Vary hard sidewall and...
