Separate names with a comma.
Never thought of that the balancer is two years old though
I oiled the seal when I put it together the balancer is off now think I'm gonna oil it with trans fluid and try that first
Tried it still there
Can't be that easy for me
Yea I even removed the damper and reinstalled it torqued to 135 I even measured from the slinger to end of crank and marked the balancer befor I...
No I dont I put a cloyes double roller in it and the noise isn't there all the time but its definitely behind the balancer
Ok so I did a timming chain all whent well even drove it awhile til now I'm getting a screaching sound behind the balancer took the belts off and...
So adding the ballast will help protect the coil
So you're saying I should hook the ballast back up
71 dart 318 coil part # 40011 I allready hooked it up without ballast and all seems fine but its raining her not going out in it
Mancini said blue wire goes where wires are spliced together 4 ballast black to ground on coil green is na
Yea my ballast is allready eliminated the question was did I need one if not where should I route blue wire
Flame thrower says remove resistor
I have the pertronix system in my old points distributor so my ballast is eliminated when I install the mopar setup do I need the ballast if not I...
Best luck to ya
at #6 the black mark on the side of distributor is #1[ATTACH]
Yea I'm getting more confused
So what take the valve cover off watch the rockers and when they both dont move and its tdc and rotor is at #6 I'm on compression
I thought if the rotor is pointing at #6 I'm on compression
Chain and sprockets
Yes sir I know I bought a cloyes I wasnt sure about tdc on compression I just posted a couple pics to verify I'm popping my timming chain cherry here
the black mark on distributor is #1 so directly across should be # 6 on compression, the # 6 with tdc locator, and where my dots line up
Ok got the timming chain do I just put crank gear at 12 cam at 6 than swap or verify tdc and put new one in at 12 and 6
Looks like a 37 tooth thanks
904 with 3:55 with 195/70/14 from what I've seen on a chart it should be a 39 tooth is that correct
And you have ram
Na I'm still here lol prbly gonna use the cloyes but which one lol