Separate names with a comma.
Same here. I have the 73-76 A body disc brakes on my 69 Dart with 14" ralley's.
The car in my avatar has 15x8 Weld wheels with 4.25 BS, 275x60x15 Nitto drag radials.
How can they be steel/aluminum? How are they bonded together?
Not enough info to figure this one out. Maybe he has a B body 8 3/4 under it?
7.5 must be a typo. I have 15x8 with 4.25 BS and 275x60x15 Nitto's on my 68 Barracuda and that is about the max on BS I can handle. Stock A-body 8...
I was a BFG AT KO devoted customer until the KO2 came out. They are not the same quality. They separate and the miles I use to get out of a set of...
Bridgestone Revo 2 load range E @70 PSI 285x70x18 I got 98K and 92 K on the second set. On a heavy truck, 07 2500 4x4 CTD Ram. Only tire I buy now...
I'm going from memory since I'm not home to check. But it seems like it was about 1/2".
I have 275x60x15 Nitto drag radials on 15x8 with 4.25 BS and they fit on the rear of my 68 Barracuda with no problems. Stock leaf spring location.
Here is a guide.
Reason they are rubbing is to much BS. I have 275x60 Nitto drag radials on 15x8 with 4.25 BS.
Narrower than the 8 3/4"? The 8 1/4"? That is news to me.
My choice isn't up there. Polished Aluminum.
This is my favorite look.
[FOR SALE] - SBP Aluminum slots with M/T tires
Not necessarily, I have 225x70x14 on all four corners on my 69 Dart and they clear fine. I do have later model Disc brakes on the front and a 8...
I have 15x8 with 4.5 BS on my 68 with 275x60x15 Nitto Drag radials.[ATTACH]
Good info above. If the others will come off, you may be able to pull out on the wheel while hitting it with the air gun.
I think I would try a 1/2" impact. It is possible by cocking the stud while spinning at high speed it may back off.
Are you saying the stud is spinning or the nut on the stud is spinning?
Is it cross threaded? Have you tried an air gun to try and spin it off? Front or rear? Drum or disc?
1/2"-3/4" seems like a lot of work for so little gain. I run SS springs with 15x8's and 275x60x15 Nitto drag radials on my 68 fish.
You will get a lot more on this site and from its members with honey than you will smart ass comments!
Problem with that is having enough meat to re drill to 5 on 4 1/2". I mean diameter wise.
I'm running 275x60x15 555R Nitto Drag radial on a 15x8" with 4.50 BS and 002/003 SS springs. This is on a 68 Barracuda.[ATTACH][ATTACH]
Look on Rock Auto. They list a 340 as 5.6 liters! LMAO
The whole" were going to the world metric measurement system" of the 80's is BS!
I agree with ^^^^^^^^^^^^^^. 5 on 4"
On the front of my 68 Barracuda I went with 215x60x15 and they fit nice on15x6. Not sure if you can get them in 14's also?
I for the most part will not run a tire that is over 5 years old! Where this information is very nice to have is when you see a nice set of ralley...
Need to know the 3 or 4 digit number at the end of the DOT on the tire. It will look like it was cast in the tire casing. What ever it says if it...
15x10? I would say no. I ran a 71 Scamp that I did the leaf spring relocation in the frame rails with mini tubs and ran 29x 10.5W 15 slicks on...