Separate names with a comma.
Thanks for the replies, good info to check
Bump stops installed, stock torsion bars for a 360, upper and lower control arms are stock, ride height was set to clear front tires.
As far as...
I took my car to Good year to have the front suspension redone, to my surprise shortly after i dropped it off they called me back to tell me all...
Put one on my 74 Duster it’s pretty much useless, the repops do not have enough adjustment to work well.
Got to figure out how to fix it I need a...
It’s on the car, I’ll try to get a shot of it tomorrow
Got the stock one, it works great
Yes, hold onto the holes and turn the stud righty tighty, lefty loosey
Yes, there are two round holes in the back of the studs, I used needle nose pliers to hold onto those
Make sure this piece is out of the way before removing the glass[ATTACH]
You have to roll the window when you pull it out towards the outside of the door quite a bit to clear the studs, make sure you remove the metal...
I used the industrial hook and loop tape 1in wide fuzzy side it fit really well for the inners and outers, works perfect
Thanks so much for posting these pictures, made the job a cake walk, I’m a visual learner.
Thanks for the replies, I’m not giving up on this basteuche.... lol
Come on guys help me out here, jeeez someone has to have some wisdom on this issue.
I can get the glass to fit good at the top but then when I...
Sometimes it’s good to get away from the cars for a little while, work, work, work
I have a 74 late year Duster, I can’t seem to figure out how to adjust the glass so it sits in close to the rubber at the top corner where your...
That might just be what I need do you have the plastic piece for the corner that is missing.
How much do you want for that piece
I need the bracket that bolts to the front bumper that the license plate bolts too for a 1974 Duster front bumper
Anyone got a 74 front license plate bracket
It’s weird when I bolt it directly to the bumper it’s sits too high or too low it’s not centered very well either way
Does the license plate mount traight to the bumper, or should there be a bracket on the bumper that it bolts too.
I don’t get your disagreement???
Anyone have in good shape or know where I can get these parts.
They are on a 74 Duster door window guide rod, I need the plastic guide rode...
Can anyone tell me where I can get these plastic bushings that ride up and down on the door glass guide rod[ATTACH][ATTACH]
Thanks for posting this, is it a direct bolt into my 74 360 Duster, I have a Saginaw pump.
What is included in the kit please
What’s included in the kit, shipping to 91345
What do you charge for the kit for 74 360 Duster
I live in stop and go traffic, thought maybe they would make an improvement on the stock units
Do drilled and slotted rotors make a difference in stopping power for street use, are they worth investment.
They look really cool, if they offer...