Separate names with a comma.
Save your money
If that snake oil stops your engine from over heating I will be amazed.
You have other issues
Welcome to the world of Hot Rodding
In all the built up cars I have owned over the past 40 some years I cant remember one the did not burn your...
Dude I doubt 10% is going to make a huge difference.
Those plugs still look lean to me
Some where I missed you were running ethanol. That is a hole different tuning game,one I cant help you with.
I know a few boys around here that...
I dont care what your meter say's or what your bumper looks like those plugs are way lean for my taste.
Again research plug reading and see for...
Judging buy you're pic's you are way too LEAN.
From what I can see of the ground strap the timing mark looks low(towards the threads) this I...
What do the plugs look like?
Where is the timing mark on the plug ground strap?
Most of the hydraulic lifter manufactures that I have looked at recommend 5W-30 or 10W-30
Maybe this will make some sense
OP reports it runs at 30 - 40 degrees initial timing, let us assume 35 degrees.
Correct initial timing should be...
Man that isolator looks massive.
My Mighty mounts are alot thinner than that.
I had header clearance issues, shimming, bending, rattling the whole shoot'n match.
Replaced my old sagging motor mounts with a set of Mighty...
Prayers do work.
I have had 2 heart surgeries would have never made it without out the love of our
Lord Jesus Christ.
I would not tear the engine apart until I tried a different harmonic balancer.
None of this makes any sense, something has slipped and is no...
Boy that is strange
Perhaps your harmonic balancer has gotten out of whack and the timing tape is no longer true to TDC.
Is it a stock balancer or...
What stall rpm did you go with?
Phone and laptop
Something simple I can get from one supplier
Plug and play for a non Techno old guy
Unfortunately no windows in the shop for security reasons.
I thought about running a cable but I have concrete drive between the two buildings. Could not come up with a way to do it.
Shop is roughly 75 ft from my home router and I have a good strong signal outside the shop building.
Do you have a link or contact info for the...
I am looking for a Wifi repeater system that will deliver my current Wifi network signal into my metal shop building.
I can currently connect to...
I am dating myself.
I remember watching Sox and Martin run Bill Jenkins and Bob Glidden at Great Lakes Dragway in the late 60's and early 70's
I also, Sox was the man.[ATTACH]
With a brick and some coal oil that may rub out LOL
Sorry I had too
Hope no one got hurt
If you want to go the route of doing a custom distributor with a vacuum advance give Don a call at FBO Ignitions he is a great guy and he will...
Oh Yah That looks like a real stock set up ya got there. LOL
I would not change a thing the concourse judges may spot it.
That is strange
IMO I still say that you most likely have a lean condition on the primary side of the carb.
Look for Edelbrock's tuning guide on...
Sure, I just have to go over to my Cousin's house. LOLA friend called the other day and said he was upset because he had sex with his third...
You said you have the TIMING SQAURED AWAY.
What is the initial timing at idle?
Do you know how much total centrifugal advance the distributor has?...
I am looking for a supplier of the Pearl White interior color material that would be found in a 67 Barracuda