Separate names with a comma.
Yes a whole front clip will bolt right up, with the exception of a couple of holes in the core support that will be in the wrong spot.
Probably was Muggyweld.
If you want to save the glass cut the gaskets out with a razor knife. The gaskets are cheaper than the glass and the glass will be easier to re...
Damn... winters coming already?
Are the cab mounts rotten?
Yes, hit with some Ospho, good stuff.
The later Valiant brougham or Dart SE has the padded upper door panels, lower level Darts and Valiants just have the painted metal upper inner...
These cars usually had runs in the paint from the factory under the hood. Plus any paint imperfections under the hood usually go un noticed once...
Find somebody with a stud gun and a slide hammer.
Yes, it's the same glass.
I'd like to see someone put a 69 Barracuda nose and grill in a 73-76 Dart. Looks do able with a little massaging on the fronts of the fenders, the...
The body lines are different so it's not a bolt on deal, and it would be tough to do with mis match in the body lines.
The glass changed sometime in 74, it's the same size and shape but how it mounts to the regulator is different. At most I'd think regulator...
If it's an oil bath air cleaner I wouldn't sand blast it. I'd use a wire wheel or a paint stripper disk on a 4" grinder.
Most European cars use bolts instead of studs and nuts, the head of the bolt is tapered like a traditional lug nut.
How about removable screw in...
Use bolts instead of wheel studs. Need to have threaded axles though.
Your local parts store should have it in stock if you're just looking for generic hose.
I have a stainless steel sink hole cover on mine.
Yeah Chrysler did about 45 years ago, your best bet is to buy a parts car or find someone parting one out.
You can keep the doors you have now if you don't mind not having the vent window, all the body lines will line up between the '73 parts and the...
Was this done to chemically remove metal from the entire door shell or to remove any seam sealer or sound deadening from inside the door?
I have a 74 duster front clip on my 72 dart and everything was a straight bolt on deal except for one bolt on each fender on the core support.
The only major difference on the firewall will be with A/C or non A/C, cowls are all the same. 4 doors have the same cowl and firewall as a 2 door...
The front section will be the same but the rear foot well area is going to come up short.
Go to a U-pull it junkyard with a cordless sawzall and cut the trunk floor out of a newer car if you can find on with a similar shaped floor.
The glass is the same but the gasket is different from 67 to 68
At that price I'm assuming you have a quarter panel skin and not a factory style replacement quarter panel. The quarter skin is trim to fit while...
The factory seat belt mount should be under the carpet right about where the end of the bottle is, no need to drill any holes in the B pillar.