Separate names with a comma.
Buddy of mine built a hot S6 years ago. I know he used the GM 2.2 liter pistons and pins. Also used the stock dumbbell tappets. Also used a good...
We have a member here that has a similar setup on his 63 Valient
Pan evac pump
Bet this thing goes[ATTACH]
Try these guys out.They may have an adapterPhethean Racing Products - Offenhauser
Did you ever rin the vert around the track with that slant?
Music acid works good. Fill the water jackets with acid and let it sir for several hours. Flush with water. Blow dry and repeat as necessary.
Awfull clean motor. Someone has been in there before you.
I did that on my Lancer wagon and it made a big differance
Probably around $60 to $75 I would imagine
Yes, seems it could be rodded out however the tree huggers have run all the shops here out of business.
1961 Lancer Wagon, 225. Anyone have any suggestions? We have no local shop that rods out radiators.
Had to remove the dizzy in my S/6. After I reinstalled I can't get the timing mark on the pully to move up the tab. Am I off a tooth on the dizzy?
Mopar Collector Guide
For you Slant guys there's a Hyperpack with the cast iron exhaust manifold for sale in the latest MCG. Thought I'd pass it on.
Trying to get my kickdown correct after installing duel carb on my aluminum S6. Anyone know the process?
I agree. I think if you look into it the valves mentioned here are probably Ferrera under a different name
Hey retired Navy,Retired army here. Just got mine running today. I don't see anything wrong with running the stock jets given that these...
Well I got the Remflex gaskets in the mail so tomorrow I'l change ot the gaskets. By any chance would someone know which header combo would fit a...
How do those SUs run on a slant?
I'm doing the same setup. I had the exhaust manifold re-surfaced. What are you doing about the seal for where the intake bolts to the exhaust? I...
Any suggestions in installing a slant mast exhaust and a aluminum intake. Made the swap last week and have a massive exhaust leak. Seems to leak...
I have a little rust art work going on on my VCs
Rotella T, 15/40 with a WIX filter and a little dab of ZDDP
Feature Article from Hemmings Classic Car
April, 2006 - Steve MagnateIf you're like us, the words factory prototype conjure thick veils of...
Not many aluminum blocks made it into 62's. A dead giveaway is that the aluminum block has no freeze plugs. Look for a cast in ID pad on the...
Yean, probably right. I have my wirefeed if I need to modify
No, the throttle rod that comes out of the firewall. It's too long. The instructions call for it to be cut off from the end, I just don't know how...
Just installed my intake and somehow I misplaced the directions. Need to know how much I trim from the throttle bracket. Any help will be appriciated