Separate names with a comma.
OK so I picked up a 1976 727 small block trans part#3898864 which tells me that it came out of a 1976 Dodge Truck 150,250,350. The guy that I...
Thank You that's a big help, nothing like having ammunition when your going to look at parts that you are not familiar with.
If I were to look for a 904 is there a particular date to keep an eye out for? Also is there a date somewhere on the trans so I can verify the...
Didn't the 1968 Barracuda formula S 340 automatic car only come with the 727 trans?
Is there a date stamp on the 727 somewhere, this would be a good thing to know also.
Thank you for the shaft differences, it's a good thing to know ahead of time.
So are you telling me to look for a 1971 up to 1979 727 SB trans from a car. Regardless of what year I find, I would have it gone through and it...
I do not have any trans right now, there was no drive train at all with this 68 Barracuda. It is a bucket seat floor shift car and I was just...
I still need a 727 SB trans for this 1968 Barracuda with a 340 engine, there is a guy near me with a 727 SB trans that was pulled off a 360 motor...
I am sure once I get the engine and trans in I will find the correct shaft for this car, they seem to be readily available here in the Michigan...
No problem I kind of hi jacked his thread, I think I will go get that dart shaft anyway you never know who will need one.
He did not say anything other than he believes it was from a 69 Dart with a 727 and come over and take a look.
I have absolutely no drive train in my 68 at all other than the 8 3/4. The engine is on the stand in the garage and I haven't even picked up a 727...
Thanks for the reply. There is a guy not to far from me who states that he has a drive shaft from a 1969 Dart that had a 340 and a 727 with the 8...
Is there anyone out there that knows the length of the drive shaft (which I do not have) for my 1968 barracuda 340, 727, 8 3/4 center to center...
I have heard some very good things about Edge racing converters so I am going to give it a shot.
I am now dealing with a company in California called Edge racing converters, don't know if any of you have heard of them or not. I am dealing with...
Has anyone used a PHN converter?
No you are right it is an 18, was thinking about another application when I typed it.
Yes correct 1966 motor with small pilot hole.
Thanks, I will put them on my call list.
I tried looking up A and A torque converters and all I get is A and A auto stores. Where are they located, never heard of them before. Do you have...
Thanks for all your help guys, I am going to spend some time on the phone tomorrow. I will let you know what I came up with.
Thank you for the info, I did not know that. Looks like I will be calling a few other converter shops to see what they offer, I don't see the Boss...
I was on the horn with Summit today asking about a torque converter for my 66. Told him what was in it and what my plans were. 1966 273 30 over...
Found one on line, works just fine.
As far as I know each different color is a different amount of teeth. It also has a number on the back side of how many teeth.
Thanks dodge71demon, that chart helps out a great deal, and thanks for looking for me. That's the one I need 2538939 (green) anyone have one?
I would not know the color, hope someone on here might and if so please let us know.
Do you have one or are you just letting me know what I am looking for?