Separate names with a comma.
No cooloing issues doing that. You might have to change out one nipple so they are both the same size. Ask the parts store if you can look at...
Congratulations! Some times it takes a while.
You can crank it through the starter relay on the fender well if you need to do it from the engine compartment.
Magnetic pick up I was thinking crank.
So you know that's a pick up coil. When the reluctor passes it, it produces a tiny bit of AC voltage that gets sent to the ECU.
Define magnetic pickup? You mean electronic Chrysler?
I rebuild mine to the stock specs the number on the distributor calls for. I have done custom ones also and a few clones, but will not tag the...
That is just about the largest cam plate mopat made 34 at the crank.
No I bring them back to the part number specs, but have been doing some customs lately for some reason, the best was reverse engineering a Mr....
Most remans from the parts stores cover a big range of applications say 10 years so they are kind of set in the middle. Look at a RA listing on...
Dan as usual you are spot on with the sizes. Fastenal has them usually in stock also when you just need a few, that's where I get mine from.
66 225 the same?
I wonder if you can cut the original one to work as a hold down. Hmm
I have some of the plates that mound to the distrib.
Good place to start. Getting to that bolt sucks to say the least with the distrib installed.
Check the condenser in the distrib they just go bad. The new ones suck.
Never really had a issue. I used to work in a rebuilding shop and hardly any returns. Only thing I remember is that sometimes when thy acid dip...
Check the condenser for the points. The newer ones sometimes fail when they get hot.
OK basics. Getting a good spark? Plugs fouled? I am assuming a points system, change the condenser lately with a parts store one? Just FYI
Can also be the distributor pick up coil opening when it gets hot, gives the same symptoms.
It will work just have to be careful when you flip it they are top heavy.
Long 3/8 bolts I believe.
Might have a used set want me to look? Shoot me a pm.
Looks like he has it nailed Duke!
And the engine bay black!
Up to 1970 I believe is red, after that it is Turquoise. Napa can order the paint if needed.
Wow that is the top of the shaft bent. Really surprised at that even from them. The new pickups suck for sure. Those and condensers have a...