Search results

  1. turbofreek

    engine harness for $$$

    it took me about 45 minutes to an hour to swap main harness in my 67. holley hp efi. i had to change a few connectors for non mopar parts on my car but this was included in that time frame. harness is like 500 bucks complete. i had 3 at one time and down to one on car and spare ive buchered...
  2. turbofreek

    This thing sounds WICKED

    very vwry few have solid roller g3 hemis. probably to count on 1 hand even globally.
  3. turbofreek

    Third gen hemi swap early A body question

    you will have to read up on the guys that did early abody swaps. there are a few of them in the build section to read through. i did a 67 so not an early abody
  4. turbofreek

    Third gen hemi swap early A body question

    would you consider motor and midplate stuff easier than bolt in stuff? cuz non of the bolt in stuff existed when i did mine. just saying it wasnt spectacularly exciting to do it from a cost or fabwork point of view.
  5. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    here is that sensor issue i found friday night. came out of its shell. this the 2nd ive had do this over the last 2yrs. i need to find a better way to get the harness plugged in and not pulling on the sensor pigtail/plug end.
  6. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    i believe its timing gear related. it just got bad enough friday it wont return to regular cam timing reading and the cage is stuck at that position. it also dont have fuel or spark. as i checked that before taking it further apart. i figured im fing done with this and going over everything...
  7. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    pulling it all apart for winter repairs, etc... well on its way. should have motor out tomorrow and try to vet a trap door put into oil pan or replace all together. its pretty beatup from the driveway.
  8. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    broke it. dont run no more. made 1 hit blew the tires off immediately. tune was spicy. then it died while idling when i was about to pull into water box. never fired again at the track. drove about an hour out and stopped for drinks and top off the tank. fired up and died and has never...
  9. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    i29 bound tomorrow for some tnt. see what these better radials are worth. not sure if prepped or unprepped. so put my hood on and have all the weight in it as well.
  10. turbofreek

    does anymore make a turbo header for an a body?

    yup same friend. its a sweet build and hope he gets it working good.
  11. turbofreek

    does anymore make a turbo header for an a body?

    is that shanes(thing its his name?) car that now runs as of a few weeks ago? im friends with him on fb
  12. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    the positive part is ive ran close to what it ran before on a full wot pass. lifting, pedalling and then reengaging the power pedal. which is insane by datalog numbers. i was off throttle for .80 seconds. 6.23 subtracting .80 of off throttle. the car is absolutely moving out. there is a...
  13. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    looks like im pulling the entkre front of the engine apart. cam wheel is most likely the culprit of all this. calling it a year for now.
  14. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    nope. datalog shows some insanity and im still trying to figure out wtf caused it.. nee tires and crank sensors already on the car.
  15. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    why my car dont hook or even attempt over the last year. i say i got my moneys worth.lol https://youtube.com/shorts/WCvOW2wbpXg?feature=share
  16. turbofreek

    does anymore make a turbo header for an a body?

    use truck logs. flip sides and drill center 4 exhaust bolts to clamp said logs down. then fab from there. i run twins behind my grill using said method above
  17. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    thank you. it is definitely a huge step forward and a win to me. my car ran as good spinning and off and on the throttle. as it did before making a terrible low rpm pass. what those vids may not show so well. is me being completely out of the throttle. pulling it strait and then getting...
  18. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    ive got a lot more power now. crank sensor took a crap on me fully by the end of the night. gonna try to get it repaired and tires changed up. see if i can make ciscs in illinois. only money and time will tell if i do.
  19. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    https://youtube.com/shorts/HVz58DfthEo?feature=share
  20. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    11.5:1 under boost. timing is 14-16° total wot. its pretty darn conservitive. it dont have rpm troubles no more either. however it has bald *** radial issues now that cant handle the extra 4-500hp more it now makes over 6500.
  21. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    im running at osborn tomorrow. you gotta go to us36. its the king of the 28s heads up small.tire no prep race tomorrow sept 3rd. i got my **** working now. seen 7k rpm like its what god sent it to earth for and only for. sounds soooo different at wot then ever before. im not leaving till...
  22. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    sooo. i made time. valve springs installed and all back together has some.happier rpm for sure now. got 2 of 8 spark plugs but rest be here tomorrow. get them installed and saturday gonna finally run a race for once. the king of the 28s at us36 osborn mo. gonna run small tire and see if...
  23. turbofreek

    Mopar Gen III Hemi COMP CAMS Thumper Cam Specs Incorrect?

    you realize that is after bdc right? which means nothing about compression building. that is allowing last bit of exhaust cylinder debris to exit. for clean intake stroke atdc. also makes it easier for piston to travel across crank throw without stalling engime with compression before it...
  24. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    i do have the springs now just no time to install. my daily/tow vehicle crapped the trans out a few weeks ago. been trying to get it fixed up and the trans rebuilt to be tougher than stock.(2017 5.3 silverado 4x4) once its fixed or out of the way. ill get the dart springs done. been a long...
  25. turbofreek

    Fuel Mileage on your Hemi swap?

    you aint the only one either. i figured 10-12 max. about to switch to gas and probably get even better. maybe 20-23mpg?
  26. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    so over the last few weeks. i attempted to run mshs outlaw class at topeka. only made a single pass before the car quit working. lost crank/cam sync. so on the gates still, it broke into the 5s with whatever the slip i posted say. 5.98(?) found another issue which i think has been my...
  27. turbofreek

    Fuel Mileage on your Hemi swap?

    i get around 18mpg on e85 and have 1k+hp. holley efi controlling the fuel/ignition
  28. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    well after last weeks tnt wed night. i found what very well has been my.issue. i ordered a new valve spring kit with more seat and open pressure. as i tried to add boost my rpm limit dropped significantly. yet the car still ran similar ets even letting out hundred feet+ before the 1/8. i...
  29. turbofreek

    67 dart stroker hellcat gen3 hemi with twin turbos...

    there is room. been there almost 3 yesrs and never been an issue. looks like it just failed and fell out upon inspection. they help a bunch even in a drag engine. very under rated part for sure.
Top