Search results for query: *

I added another edge detail (F) to post 8 is that it?

1 1/2" more than the KH brakes or more than the Drum brakes

Not likely but you could have a bent axle flange. Loosen the lug nuts then rotate the wheel. My dart got hit in the rear quarter and the rear wheel. It moved the wheel enough to run it on the inner fender well momentarily. BUT... The leaf pack is twisted. If I unbolted it from the housing...

If you can't get it figured out... I can make you a CAD file and you can send it to an online company who can plasma cut it out of what ever thickness plate steel you need.

What car, what year, what wiring kit, what worked before you mage changes, why did you make chsnges

Take photos and post what you see. I made the mistake of thinking my tortion bars were fatigued and put them in a vice and with some extra leverage twisted them a few degrees more. BIG mistake, took the temper out of the spring and while that still works are weak in the tightest position...

I have a 68 dash bezel in my possession now and will be able to get the 67 cover 99% and I have a 67 cover incoming. I can also make a 68-69 cover Current 67 cover on 68 dash It seems that the 67 valient And barracuda covers are different.

I have my original 67 Dart, Valient, Barracuda and have seen repost that are close and others that are exact. I don't know if it changed in 68.

It's not the bars it's the sheet metal that supports the bars. Common problem in 67-69 converts This sheet metal part is unique to 67-69 darts. 67-69 barracudas the sheet metal is different, not interchangable with darts. Also the Dart Convert Tortion bars are unique to 67-69 dart concert, I...

I just noticed yours measured 7 3/8 wide. Now I have 3 dimensions 7-3/8, 7-1/2, 7-3/4

Don't know yet but it won't be $300.00 :rofl:

Another thing to check for is gunk in the bolt hole. Clean it out and run the bolt in without the housing in place. You should be able to run it in till the head of the bolt has less distance to the manifold than the thickness of the t stat housing.

your second pick is VERY helpful!!!!! is the detail like: A B C D E F

I put a real Gasket on 8 years ago and have not leaked a drop I even removed it once and changed the thermostat to a high flow (which did nothing to improve my cooling) MOST IMPORTANT... FOLLOW THEIR DIRECTIONS AND USE A INCH POUND TORQUE WRENCH!!!!

is it just me or do the nuts and wheel seats look galled

I all, I helping a member with a radio delete plate for his Barracuda, I have deduced the height and width and the post spacing and length but what I can't deduce is the thickness. If anyone has an OEM 67 Barracuda radio delete plate handy would you PM me so I can get the dimensions I need to...

We will have to agree to disagree. I do agree that it does not pop open and i never said or suggested that it does it is a thermostat and it regulates (buy increasing or reducing the flow of coolant THROUGH the radiator) but once the engine it above the temp the thermostat is fully open it...

If you find that your engine doesn't have a t-stat yet it idles at 200 f that's proof right there that the cooling system is working as it should. (Unless you have another issue as mentioned earlier and is minimally capable The t-stat ONLY sets the MINIMUM temp and has nothing to do with the...

I would contact Lutani.

I drill and tap Stainless. I broke 2 taps (run of the mill hardware store) but now only buy HSS, they are good for 4 or 5 tapped holes. If you can have a machinest do it that would be your best bet. (Plus younger insurance of sorts) They know about speeds and feeds and lubrications that the...

The 14 x 4.5 stock steel wheel fits on front disk

And the best part is the LH lug nuts are available plain old aftermarket or restoration quality

Check Ford mustang etc of the same era. Many are also bendix and 1 inch

I'm 99% certain the pistons and seals in the drum drum master are different than the disk drum. Look at photos of the two.

On the shaft itself are the yokes 7290?

Personally I would look for one that is suspended above the car, like by a hoop of PVC pipe

I called AAA once (pre cell phones) and waited by my car. 45 minutes later I called again and they said the tow truck was there 20 minutes ago but I wasn't with my car. I saw a tow truck drive through the parking lot but not near my car. I changed my insurance the next day

What is the OD of the fatest part of the shaft and the center to center u joint length. Lastly has it been modified in any way from stock

No and mine is probably flat but I would rather drive on a flat spare and destroy that then on a good tire with a nail in it. I agree that with the advent of cell phones tow trucks are at the touch of a button but... My daughter was driving her 2021 Jeep renegade on the interstate. She and...

I'm kind of stalled, the lip on the metal plate is proving more complicated than i expected. Also the firewall will need a couple relief cuts made. I wanted it to be plug and play but that's not going to happen. I have one sample plate left if you want to give it a try pm me. In this photo...