Separate names with a comma.
Just Mopar is your source for mopar weatherstripping products
These folks are very helpful and have quality parts. Give them a call.
Ever wonder why your car runs better on a cool morning? Scoop or cold air duct works.
Ordered a cake pan 4"x17" and riveted my open filter base plate to it. Seal is scrap pieces of extra window channel seal.[ATTACH][ATTACH]
After cutting the hole for my 14" filter I added 10/32 machine screws to stiffen things back up.[ATTACH]
73 Dart Sport has them. 73-76 doors are different in other ways.
I did it to mine. I cut the opening for the 69's to fit and made 2 upper and lower L brackets to hold them in.[ATTACH]
Get some nylon fishing line and two pieces of wood dowel rod to slip under the molding. Once the trim is off the 3M adhesive cleaner will get the...
That's the right #. I could not find a vendor to buy new so I picked up a used from a FABO member. They show up every once in a while.
HT is about 1.5" shorter. You need glass from a 2 or 4 door sedan, post car.
All my pot metal badges on my 67 were junk and I was not going to pay top $$ to replace. I deleted everything. Here's a pic of what your car might...
Here's a drawing I found on the web that may help. I converted my 67 Dart to 68 front trim using this as a guide.[ATTACH]
I made a collection of blocks out of schedule 80 PVC pipe and glued high density foam to them. You need to block sand in a X pattern and you can...
Page 8-107 chassis service manual
you can go to www.mymopar.com and download a 73 service manual
Not a Duster, but this is my 67 Dart in gloss black, dual snorkel. I went with gloss because it's easier to keep clean.
When I had my 67 painted white I went with a gloss black hood and engine bay. I like it and that's what counts. My 73 is original white engine bay...
Use the cleaner wax with a 3M foam pad on a low speed buffer. Wash entire car and apply good quality wax or poly sealant.
You can trace it on thin aluminum and paint it red. It is only there to separate the reverse light and stop/tail.
3M adhesive remover will loosen the glue. You can buy a qt can at any body shop supply. A heat gun on low setting can also work.
Mix up some liquid automatic dishwasher soap and hot water and drop it in a bucket. Let it soak and scrub with a brush. It will take off any paint...
I have the sport mirrors and the passenger mirror size is wider. Only good for a quick glance to check blind spot. Worthless at night.
Soak them overnight in a bucket of water and automatic dishwashing machine soap. Polish with toothpaste.
Each side has 2 bolts. Loosen the forward bolt and slightly loosen the other. You can then lower the deck. Mark your washers before moving for...
3M 5200 adhesive is sold in marine stores and comes in a small tube. Follow directions and they will be there forever.
Since you are in FL go to a marine store and buy a tube of Flitz metal polish. Follow the directions, a little bit goes a long way. It's pricey...
Good people, prices, quality