Separate names with a comma.
Cut 2 grooves diagonally across the race 180* apart. Hit with a sharp chisel and the race will crack in 2 pieces. Wear goggles!
I've used M1627 from AZ, cheap and they work.
No. You need the larger bore piston for manual brakes.
I use this one from Autozone and it works great....
Never had a problem with this one. Been in my car for 3 years.
Biondo Line Locks LL
/6 got the 9"
V8 got the 10"
If the calipers are used, extended the pistons and use the c clamp to compress with the bleed open. If crude comes out while bleeding this is your...
10 x 1 3/4
Autozone has the wheel cylinders for about $8
Turnbuckle nut at home depot, lowes. About an inch long and you can extend using threaded rod.
Ace hardware has C clips that work fine.
It's a real pain. Bolt and locknut on the other side. Sometimes it's better to yank the seat out and lay down.
I would also make sure the brake rod is still firmly seated in the MC
It probably has rust pits. I always take a flat file and smooth out the top before installing. You can also buy another rubber gasket and cut the...
It passes through a hole next to the left torsion bar. There are two holes there. One for the emergency brake cable, and one for the brake line. I...
On my driver I run manual 73 disc and 11x2 1/2 drums. Plenty of brake for me.
Ran across these new SBP drums while looking for other partsMopar Rear Brake Drums 10 x 1 3 4" 5 on 4" New Brake Replacement Dodge A Body | eBay