Separate names with a comma.
There should be a steel finger that stick out on back of steering wheel it to cancel the switch it called a cam.it should be holding the horn ring...
Hi i have a 73 340 Duster Y 28 code car with a full option tag. I plan on restoring it 100% factory it was built in Hamtramck Mi. 1/17/73 and I...
Well mine is in about the same shape
But wasn't the 72 a steel crank..73 was first year for cast Because i have a 73
Is that at top ? Because dont 68 69 share same Qtr panel
I have two so tell me about it
I am looking for some also if you find some let me know ..lol
The shape is the same as 69.. But the 68 lens has two red lens with back up and 69 has 1 and back up
I think the bottom fell out because Wall street is booming and they were buying these cars when stocks were down as a tangible asset now they are...
There are two diff thickness for small gaskets that comes in over haul kit thick for 90 adapter thin for stock
Did you use both gaskets ?
It Don"t not matter..But mine is a 4 door
Looking for vinyl top trim for a 69 Valiant for the rear section of roof by deck lid.
Think 67 thru 71 will fit
Its just easier to just pull windshield
The problem is the threads of the bolts would be pushing the windshield rubber up in to glass if you flip it over
Best to remove wind shield had some one try that trick .. because if you cant get them out how will u get the new ones in
If you need them switches i my have new ones
Look at your wiper motor and see how many wires you have that might tell you if its a three speed ..Think 4 wire is three speed 3 wire is 2 not...
I think it just a different shape Knob from one year to other but the stem is same
This is a 71/74 e body complete floor shifter linkage with boot $80.00 plus[ATTACH] [ATTACH] shipping
Had a friend make one kind of like that but with a drain pan and tack welded 3/16 plate with a hole for it to fit and put some lube in it and...
Sounds like some one has the wrong gaskets or metering block on it not letting your boosters pull the fuel out of bowels.. Because your squitters...
Do you need that part number ? or just a shroud for a 26 inch Rad
There was some one on here looking for the shock mount bolts you have in pic
Do you have to have the correct # one
Yea you know how it is when you are typing and thinking it in your head and you punch the button to many times..Need to proof read better ..lol
Sorry i dont ..It was a 360
Hope some will see a typo and not actuality think that
Have a clue just fat fingers
Opps you are right