Separate names with a comma.
Looks like a hinge plate and latches for a back seat
not sure what car though
I’ll take the 4 upper a arm cam bolts and if the sending unit lock ring is an original
mopar part I’ll take it as well
Looks Leo is gonna help you out :thumbsup:
i’ll check for the detent roller this evening
[ATTACH]In the red circle that’s about the amount over that section of the radiator support is off[ATTACH]And this amount probably is real...
You got the coronet all squared away so looks like your on the wife’s car now? From your pics it sure looks like there’s been some damage...
You looking for a loaded or empty case?
I think I may have one let me check if so I’ll mail it to you
I was thinking rick sold those as well but maybe not. They only serve to hold the door open and don’t control alignment at all. Maybe just find an...
That will do it every time! You could find try to find another board or just scrape the coating off the circuit on each side of the break and...
Don’t know about the rich part but you be famous with them squeaky bushings:lol:
and squeak a lot:lol:
It’s considered an a body thereSouth American Valiant, Charger, Coronado, Dart, and other A-body images
What color is the 40 tooth?
has a touch of AMX/matador in it too
[ATTACH] Argentina GTX
It’s definitely a B body and looks like an Aussie. Has
the roofline of 68-70 b body and looks a lot like a 70 RR back half it’s cool as hell!
That part is not reproduced you will need to cut a couple pieces of rubber gasket material the same thickness and also insulate the hub shaft...
The holes are in the front and will be under the seat cover. It’s best to poke around with a stick pin to locate the holes but you would need a...
Are making sure the pivot shaft is bottomed out in the hole while tightening the nut? Try tapping it lightly to seat it in the socket in the k...
they’re too busy concentrating on chevys:lol:
Should be the dimple circled going by the pic @Dubob
There should be a factory dimple where the hole should be
This may help
Factory tach wiring
The chrome is attached to the back edge of the glass
with glass setting tape.
Welcome to FABO Dale! Dusters never came with a HEMI but hey it could still have one I guess if a previous owner put one in it.
The nylon pins are not really pins the nylon is injected
In one hole and flows around a groove cut in the inner shaft to form a band between the...
36.375 for power and 40.375 for manual