Separate names with a comma.
215x60x15 on 15x6 in post 17
Looks good. I'll check my fronts.
Here is a picture. Clears perfect.[ATTACH]
BBP. I will post a picture showing how they look later today.
I'm running 275x60x15 Nitto drag radials on 15x8 wheels with 4.25 BS. No problem on my 68 barracuda in my Avatar.
So on right hand drive cars you would pull? Right? Drivers left or right is universal.
Your right , most people would twist two of them off before they realized they were left hand thread!
You for real? LEFT has always meant from the drivers point of view. Since Moby Dick was minnow! In 1974 I worked at a large repair shop. my boss...
Same here. I have the 73-76 A body disc brakes on my 69 Dart with 14" ralley's.
The car in my avatar has 15x8 Weld wheels with 4.25 BS, 275x60x15 Nitto drag radials.
How can they be steel/aluminum? How are they bonded together?
Not enough info to figure this one out. Maybe he has a B body 8 3/4 under it?
7.5 must be a typo. I have 15x8 with 4.25 BS and 275x60x15 Nitto's on my 68 Barracuda and that is about the max on BS I can handle. Stock A-body 8...
I was a BFG AT KO devoted customer until the KO2 came out. They are not the same quality. They separate and the miles I use to get out of a set of...
Bridgestone Revo 2 load range E @70 PSI 285x70x18 I got 98K and 92 K on the second set. On a heavy truck, 07 2500 4x4 CTD Ram. Only tire I buy now...
I'm going from memory since I'm not home to check. But it seems like it was about 1/2".
I have 275x60x15 Nitto drag radials on 15x8 with 4.25 BS and they fit on the rear of my 68 Barracuda with no problems. Stock leaf spring location.
Here is a guide.
Reason they are rubbing is to much BS. I have 275x60 Nitto drag radials on 15x8 with 4.25 BS.
Narrower than the 8 3/4"? The 8 1/4"? That is news to me.
My choice isn't up there. Polished Aluminum.
This is my favorite look.
[FOR SALE] - SBP Aluminum slots with M/T tires
Not necessarily, I have 225x70x14 on all four corners on my 69 Dart and they clear fine. I do have later model Disc brakes on the front and a 8...
I have 15x8 with 4.5 BS on my 68 with 275x60x15 Nitto Drag radials.[ATTACH]
Good info above. If the others will come off, you may be able to pull out on the wheel while hitting it with the air gun.
I think I would try a 1/2" impact. It is possible by cocking the stud while spinning at high speed it may back off.
Are you saying the stud is spinning or the nut on the stud is spinning?
Is it cross threaded? Have you tried an air gun to try and spin it off? Front or rear? Drum or disc?
1/2"-3/4" seems like a lot of work for so little gain. I run SS springs with 15x8's and 275x60x15 Nitto drag radials on my 68 fish.
You will get a lot more on this site and from its members with honey than you will smart ass comments!
Problem with that is having enough meat to re drill to 5 on 4 1/2". I mean diameter wise.