Separate names with a comma.
Thank you everyone for your suggestions, will make that tool , although, I have broke that tang off (my Bad), and still can't get it to move, more...
As RR said, your inbox is full,
I have done it but 30 or so years ago,
how do I get the connectors to come out of the engine side of the bulkhead connector,
I need a refresher so...
Hi Steve, Are you isolated at home, good idea stocking up on booze, keeps the insides clean,
fixing this issue should take up a few days or weeks,...
Yes they can.
Matt, I can't load a pic here, but I can e=mail a photo, I don't have a cell either, damn, am I old!!!!
Not a show car by any means but trying to keep it stock,
The plastic connector broke or fell apart, wire seems OK though.
Need help finding a fusible link for my 75 Duster 360, thought I found one at NationalMoparts but it was for a 74 and the connectors are opposite...
Awesome site ya Hoser, Eh!
Redfish, now I read this.
You guys are the best,
I got it out !!!
Tapped it, screwed a bolt in, put vice grips on the shaft of the
bolt just below the head, and hammered up...
Oldmanmopar, any chance you have a pic of that tool.
Long story, had to move dipstick after new gaskets and paint and reinstalling the engine,
broke the dipstick off flush, put a tap in it and got it...
Nice to hear from you Dave,
I guess most Daves have Cudas.
Great pics, always wanted to do mine, but don't trust my abilities.
[ATTACH]Yes, 1968 Formula S Fastback is my favorite also.
I bought my 68 383 S from Dave in I believe Smithsville close to where you bought your 69
Cuda, I do believe the Dave I bought my Cuda...
Looks like you had local BB expert, Al build your engine.
My 68 383 Auto S has a build date of August 18.
Oh, very nice Cuda.
yes Steve I do.
where did you buy you rebuild parts for the calipers from?
Steve after seeing how much sheep you are going through with your calipers, I just bought the set that JV had, it will cost a bit to get them...
Crap, screwed that reply up,
anyway Steve, if you get it close to Buffalo, Niagara area, the wife and I can go for a drive and pick it up for you,...
Thanks Swinger, That's great, I have 1 different mount, but will have to use that pic and get it back together. Thanks Again, Dave
1975 360 e58 with PS no A/C, was apart when I got it, want to know how to mount the air pump and the ps pump and the alternator as I found a mount...
Looking at a brake lathe, $350, says it all works and has all attachments, how old is it and
it is for my use only, so not much use by me, is it...
-10 +10 Rain, Snow, Sleet, Freezing rain, all in one day, Ahhh winter in Southern Ontario, Hope all is well Jim
Welcome from Ontario.