Separate names with a comma.
I’ve considered moving on to a 727/turbo 400 but this little 904 is doing its part
So far I’m impressed with it
And some how I gotta believe it...
They are Texans now
On a side note the stock input and output shaft made the weekend
[ATTACH] Ok Ive been working with getting my leaf spring dart to cut a light on a 4ths protree
And this weekend things have really came together...
And certainly good news thanks for sharing
Darren and I spoke about it
If it breaks I’ll update
I have a race on the 22nd of feb
So Hopefully I can go a few rounds
I also have a ton of...
Thanks to both of you guys I was hoping for at least one of you to reply and I got both of the pros
I’m gonna keep on the same path
anyone wanna take a guess on how passes before the stock 904 Input shaft breaks
I finally got my car to cut a good light
It took leaving off the...
I agree and as a matter of fact the engine I bought for the swap has two broken exhaust studs and a two damaged lifters
That basically trashed...
Got Mine today
I can’t believe that you guys aren’t super excited about the terminator being released for the hemi
I know I am !!!!
[ATTACH] This is to me a far better option for us over the mopar kit
You can tune it yourself once you done any mods vs paying for a tune
The first set of scar I beam rods came out of the block
Basically built the same engine with H beam
Back together and...
Have started a thread ?
I’m moving away from the 408 as fast as I can can also.
Correct me if I’m wrong but I believe you are the member that switched from a 408 to
5.7 based 392
If so are you up and going with it yet and...
I really don’t know what they are
The came in a pile of parts I bought
So these factory headers will fit a
Abody with a Qa1 k member
The driver’s side looked really tight with the
Anyone know [ATTACH]
Thinking about running it completely stock just to see what kinda ET it will run
Yup going in my dart sport
Will likely add pistons and rods...
I’m not sure if there is any differences between the two I know the heads can be switched from a 5.7/6.4 so I dunnoThis is a stock 2014 vvt 6.4...
[ATTACH] The 6.4 fits decent I have a couple bolts in the trans bellhousing and the mounts bolted in
No exhaust ,the headers look like they will...
Ok the 360 is back in right
What’s it run with the 360 on a max effort pass ? And just curious what heads are on it
Our combos are about the same
Actually I have less compression and less cam
12.5 to 1
And 260@50 .415 lift
And I used that carb from the start
[ATTACH] I have a set on Order along with a nitrous cam from Bullet
So I will have some real world info on them in a month or so. Sorry fellows...
Glad to see it running
Have you ever got a weight on it
I found a 90 model cheap and in great shape
Just went 6.42 with those rhs heads
At 105 and some change
I’ve looked into who was/is running them
And I’m using them on mine now
I believe and I think I’ve proven it to myself tuning mine
When I was...
[ATTACH] [ATTACH]It ran good
What does this mean[ATTACH]