Separate names with a comma.
You can still get the RB new from Summit.
Small block ones have not been made for a while.
I have 15x7 4.25bs on my duster, I believe the tire size is a 215/65/15.
My car is not at my house right now to double check. The tires are BFG.
0444 3436 AC-001
I can post the mopar part number in a little while, (watching 4 year old granddaughter at the moment).
Try your local Dodge dealer, I just got two kits. They were not that much for factory parts.
I said it, no fun at all, went thru that on my first duster.
The current one I built has stock 340 manifolds, did not want to deal with headers.
My wife's cousin and her husband both lost their jobs when the local newspaper in their town shut down around a year or so ago.
Headers on a A body are not fun.
I subscribed. One dollar an issue is cheap.
To anybody reading, they are pretty slick, but expensive.
You can buy AN to tube adapters, the tube part uses a compression fitting.
That would be the best move, you know the oil pickup has to have that crap in it.
I took an oil pan off one time and it must have weighed 50 lbs...
Rain has set in here also for a few days.
Header is the hard part.
The damper is an easy job.
Snow in AZ in April?
This one will work, they also make an sfi one if needed.https://www.summitracing.com/parts/pfs-80012
You should also consider repairing the floors correctly, they are also a structural part of the car.
A Stihl will last you forever.I do not recommend Husqvarna. My dad gave me a brand new one. It started right up. Let it sit for about a year,...
You have way too much time on your hands.
They have two versions for LA's one is open chamber, the other is closed chamber.
Valve cover on the right, you are supposed to drill the blank spot and use these gromments.
This is how Mopar designed them.Mopar Performance...
Eldebrock does make an aluminum set for dome pistons.
That is not very nice...........
My rear axle guy told me the best way to break in gears, were to run them around town easy until some heat could be felt on the rear housing.
Did you really mount the bottle right behind your seat?
You are almost to the finish line!
Have it shipped to your house.
Non-detergand 30W is baically lawnmower oil, try your local auto parts store.
Just use what you have.
X2 that is what I do.True story had two buddies buy identical Harleys.
One putted around on it, the second one I broke it in for him, pulled the...
After all that work, you went back to a carb?
Dont blame you way easier.
I currently just took off an old Holley DP 700 off my Duster that ran...